[jeroenbmw]

Hello,

Can someone repair eeprom file attached, its from F20 and its now not able to code or flash with e-sys, e-sys tell acsm needs to be replaced.

The error is internal error 930ABD

CAR INFO:
BMW F20-LCI
YEAR: 04-2019
VIN: WBA1R510407D89206

ECU INFO:
ACSM4B
BOSCH 0285 015 096
65.77-9461918-01
BMW-Nr 319461918017
SER Nr 19B0805H00G8D
EEPROM ST95128R

Thanks

[volavka]

Please read ! https://cartechnology.co.uk/showthread.php?tid=2175

Br.V

.

[jeroenbmw]

Please read ! https://cartechnology.co.uk/showthread.php?tid=2175

Br.V

.

Thanks, i updated the post with the complete ECU details

[superjet]

test and report back.
pass in pm.

[jeroenbmw]

Thanks, 

This is not work, still have internal error 930ABD

Essys say this when want to code

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before/after TAL execution is deactivated.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2021/04/07-04:40:42.037
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[ACSM - 1] prepareECUforCoding started [PROGRESS]
[ACSM - 1] prepareECUforCoding finished [PROGRESS]
[ACSM - 1] authenticateECUforCoding started [PROGRESS]
[ACSM - 1] authenticateECUforCoding finished [PROGRESS]
[ACSM - 1 - cafd_00000911-004_004_001] Transaction type: cdDeploy;  Message: TA started [TRANSACTION]
MCDDiagService<id=62634, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : conditionsNotCorrect, link=ACSM_01_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code conditionsNotCorrect; LinkName: ACSM_01_ETHERNET
severity: ERROR
[THROWABLE]
[ACSM - 1 - cafd_00000911-004_004_001] Transaction type: cdDeploy;  Message: TA finished [TRANSACTION]
[ACSM - 1] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code conditionsNotCorrect; LinkName: ACSM_01_ETHERNET
severity: ERROR
[WARN]
[ACSM - 1] - [Exception - ACSM - 1] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code conditionsNotCorrect; LinkName: ACSM_01_ETHERNET
severity: ERROR

[ACSM - 1] prepareECUforCoding started [PROGRESS]
MCDDiagService<id=230634, job=com.bmw.psdz.jobs.uds.MCD3_PrepareECUforCoding, service=DSC - DiagnosticSessionControl, description=error: negative response : conditionsNotCorrect, link=ACSM_01_ETHERNET> [DIAGSERVICE]
[ACSM - 1] prepareECUforCoding finished [PROGRESS]
[ACSM - 1] authenticateECUforCoding started [PROGRESS]
[ACSM - 1] ECU Authentication error: seed empty or not available [PROGRESS]
[] ECU Authentication error: seed empty or not available [THROWABLE]
[ACSM - 1] There was an error during TAL execution, please check the log files. [WARN]
[ACSM - 1] There was an error during TAL execution, please check the log files. [WARN]
[ACSM - 1] - [Exception - ACSM - 1] ECU Authentication error: seed empty or not available
[ACSM - 1] finalizeECUCoding started [PROGRESS]
[ACSM - 1] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - ACSM - 1] ECU Authentication error: seed empty or not available
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "6s". [C206]
Abarbeitung beendet

---

And when try to flash with esys following error is here.

Read SVT before/after TAL execution is deactivated.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2021/04/07-04:45:33.560
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForFlash started [PROGRESS]
MCDDiagService<id=20600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=CC, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
MCDDiagService<id=76600, job=com.bmw.psdz.jobs.common.MCD3_PrepareVehicleForFlash, service=RC_SEM, description=error: negative response : conditionsNotCorrect, link=#RtGen_MultipleEcuJob_LogicalLink> [DIAGSERVICE]
[ACSM - 1] Failed ProgrammingPrecondition ECUId:ACSM_0x01 error ID:192 - Significant internal error. ECU has to be replaced! [THROWABLE]
[] prepareVehicleForFlash finished [PROGRESS]
[] finalizeVehicleFlash started [PROGRESS]
[] finalizeVehicleFlash finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "12s". [C206]

[dragon100]

Check this and report ...