[codeone]

Hi guys, i have bricked CAS during winkfp update
I think there was some hardware issue cause during read/write with xprog i was getting many errors.

i think i suceed to read eeprom and corrupted flash.

both eeprom files and original flash in attached zip file or mega link

Car: 2013 BMW x1 E84 18d

Got new one with same numbers, but don't have acces to full cas3 editor to easy merge key codes, isn etc.

or maybe i'm doing something wrong? I put original eeprom copy to donor one, but still no response from car.

Is there any helpfull soul who can help me with it?

Maybe someone could correct my original flash? Or maybe someone have flash dump which fits?

[16eddi67]

Hier you dump fixed end testet...............

BR EDDY

[16eddi67]

I don’t understand people who ask for help and after that they pierce where without an answer and greetings.
Lost the desire to help...

BR EDDY

[volavka]

I don’t understand people who ask for help and after that they pierce where without an answer and greetings.
Lost the desire to help...

BR EDDY

simple do as i do
Help who deserve and when i send PM password or solution to someone else i send including word (if no feedback = no help in future)

Best Regards

[codeone]

I don’t understand people who ask for help and after that they pierce where without an answer and greetings.
Lost the desire to help...

BR EDDY

Sorry for no response, but You told me to check and then reply/respond.

So i just finished putting everything back together and did test ride 5 mins ago.

Except updating car and fixing bricked cas i was also retrofitting it.

Cas works fine, so thanks once again Eddy.