Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Fix for XENTRY Pass Thru Communication Error 99.58642.0
24-08-2023, 01:19 AM,
Post: #1
|
|||
|
|||
Fix for XENTRY Pass Thru Communication Error 99.58642.0
I managed to resolve an annoying communication error (99.58642.0) that I have been experiencing for a while when trying to scan certain vehicle models using XENTRY Pass Thru 23.6.3 with my Tactrix Openport 2.0 and GODIAG GD101 PassThru devices. E.g. my A45 AMG W176 would always throw Communication Error 99.58642.0 when trying to scan it.
I searched for solutions online and come across other threads/posts with users experiencing this error but sadly with no solution, but I finally figured out the stupid reason lol. If you have DTS9 installed on the same machine as XENTRY Pass Thru and have also imported the 'PassThruSupport' regkeys that have been provided on here and elsewhere so that DTS9 can recognise your PassThru VCI, then that is the cause of the this XENTRY Pass Thru communication error. The DTS9 PassThru VCI regkeys floating around on here and elsewhere are basically just exports from "HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04" and then re-imported to "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04" which allows DTS9 to recognise the PassThru VCI so it can be added as a VCI within the DTS9 settings. The problem with these copied keys is that they seem to conflict with each other due to having the same key names (for some weird reason), regardless of them being in different registry locations. They were the cause of my XENTRY Pass Thru Communication Error 99.58642.0, and here is what I did to fix it: 1. Open Regedit and navigate to "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport.04.04" and you will notice your PassThru VCI name as one of its subkeys. This is the location that DTS9 looks at when identifying PassThru devices. 2. Rename your PassThru VCI subkey. E.g. I renamed 'Tactrix Inc. - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM' to 'Tactrix Inc. DTS - OpenPort 2.0 J2534 ISO/CAN/VPW/PWM'. You do not need to rename anything that sits under this subkey. Doing this for each PassThru VCI that I use with both DTS9 and XENTRY Pass Thru has resolved the Communication Error 99.58642.0 that I was getting when trying to scan some models using my PassThru devices with XENTRY Pass Thru 23.6.3. I replicated this conflict by re-adding the DTS9 PassThru regkeys shared on here and elsewhere and the error re-appeared, then manually renamed them again (as above) and the error vanished. Hope this helps someone because its been bugging me for a while and I spent many hours reading logs, re-installing all applications and even Windows etc. just to find out that it was these regkeys conflicting with each other the entire time lol. If this helps you then remember to leave Thanks + Rep! If you would like the ease of using a solution I have put together that resolves this issue for various PassThru devices rather than doing it manually yourself as instructed above, then leave Thanks + Rep + PM me for the archive password DO NOT ASK FOR PASSWORD IN THIS THREAD! |