[Cjnek]

Hi, The car has already arrived with immo off. I would need to do it on immo on, just streamline the system. No data from the original ECU. In attachment VIN,PIN,CS,MAC from dashboard. Would anyone be able to help?

[ROD-BENDERS]

Hi, The car has already arrived with immo off. I would need to do it on immo on, just streamline the system. No data from the original ECU. In attachment VIN,PIN,CS,MAC from dashboard. Would anyone be able to help?

the wrong immo off algo was applied to this ecu type

I might add... you dont have the powerclass of the original so immo on is pointless

Br

[Cjnek]

I can't add key. It's an option to modificate eep in dash to make akl? Dash is CDC+24C32 1K0920863. I attach eeprom from dash. 

Autel, Lonsdor do not want to add the key (both read immo data correctly). New transponders precoded for TP23, dealer key is generated correctly, but don't want add new key. The coil at the ignition switch has been checked and is operational. VCDS will accept PIN 02456, but the immo blocks in the adaptations are inactive.

[ROD-BENDERS]

I can't add key. It's an option to modificate eep in dash to make akl? Dash is CDC+24C32 1K0920863. I attach eeprom from dash. 

Autel, Lonsdor do not want to add the key (both read immo data correctly). New transponders precoded for TP23, dealer key is generated correctly, but don't want add new key. The coil at the ignition switch has been checked and is operational. VCDS will accept PIN 02456, but the immo blocks in the adaptations are inactive.

write file

start car

Br

LATEST:
ecu datas
PIN: 30492
PowerClass: 42
Mark: VW