[youngkyu choi]

hello
jaguar xf
VIN SAJAA0648CNS23441
rear bcm2 CX23-14D628-AE
kvm(rfa) 19G481-AB
I need a virgin file
I will pay

[lupu_sandu]

For KVM you don't need a virgin file.
Secondhand unit KVM will work without problems using JLR/SDD.

[youngkyu choi]

For KVM you don't need a virgin file.
Secondhand unit KVM will work without problems using JLR/SDD.

hello
thank you for your reply
I tried several times using SDD.
Because we have so much experience, we can handle SDD with confidence.
But this car doesn't work.

The original failure involved the hazard lights and the car started normally.
Emergency light failure is caused by a rear BCM2 problem.
Programming a new rear BCM module with SDD after replacing used parts
Sync is off
Press KEY ON to raise the gear stick.
But the engine won't start

To fix this issue I changed the front BCM to a recovery file and
Even if you proceed with creating an immobilizer after the BCM program with SDD,
Problem not resolved
I tried replacing a used dashboard but same thing.

I need a new sync
I think 2 new keys and rear BCM2 virgin files will solve the problem.

Are there any rear BCM2 virgin files?
If you have it, please send it to me.
I need your opinion on something or something I haven't thought of