[ruffles1986]

Disconect battery for more 2 hours,,ropes together (positive and negative) with a common wire,,,, wait for over 2 hours,,, conect battery poles, and try again,,,,,,,,,, PS,,,,,

This ECU is that you use this machine or any other machine is ..... If it's any other car,,,, Caution,,, year of manufacture and engine power,,,,,,,,

the ecu is original from car, but already was open, i think other guy try to do immo off, or virginize to do rolling code...or i dont know what he try to do. i wait for try with can clip to code inector.
i thinking about my problem and one digit of one injector not see good, i think is letter A but im not sure 100%, i have message correct coding but perhaps the message is because have 16 digits, but the code is not recogniced for the ecu.
today i not have time to work in this car, the next week i tell us.

thanks for help me!!

[ruffles1986]

In first place vety thanks in advance for help me, My problem is solved.
Finally i confirm that emulator for carlabimmo works fine with Ecu Delphi DDCR Trw With CAN.

I try with Can Clip to code injectors and not work, the problem was label of injector cut.
Then i post some tips for this car:

1- if you input 16digits the code is acepted, but if the code is not complety correct (algorithm) then not code it really, and appear code 3042042042021010.

2- if you have code 3042042042021010 stored in one injector or more the car not accelerate.

3.-The coding injectors can do with Wuth Wow or Can Clip, both works

Note: the correct code of injector that caused problem is E03592D421408A05, the incorrect code was E03592DA21408A05, little crazy issue