[ruffles1986]

If the injectores are not correct programmed in this car is posible not acelerate?
i saw other cars with injectors not programed, the car start and acelerate... in this car is posible not acelerate?

Any idea??
[/quote]

yes if injectors are not programed the engine will not accelerate as it has no correction values for the injectors

read the labels on injectors write down codes and then program as i have shown in the word file

use only CAPITAL LETTERS WHEN CODING and there is no o just 0= zero

try recording the injectors as shown also remember no1 cylinder is the flywheel end of the engine !!
[/quote]
Thanks mate i know in french cars normally cylinder 1 is flywheel side.
I try to coding injectors with Wurth Wow, i use Capital letters and values are between 0 and E.

I think the problem is Wow because when i look values before coding injectors i can see 3042042042021010 on four injectors.
And after coding injectors on cylinder nº1 the value not change.... then injector nº1 is not correct programmed.

My doubt now is if eeporm are corrupt maybe Wow detect other Delphi system (DCM 1.2 or TRW) and write code on incorrect adress because problem is always with nº1 injector...
When coded the injectors always saw correct coded message.

My numbers injectors:
E03592DA21408A05
54358B54AD60EB08
AC39AB172D912C8A
88356B13A91CE9C8