[tyrystorek35]

The same password, if it doesn't work, it's probably a problem with the ECU, it's failing

The file comes from another controller with a changed VIN, so I did not upload it for fear of complete damage. The problem with the first file you sent me is that there are errors B1193 crash event storage full and locked and U3000. The files previously sent above removed the B1193 error, but the U3000 error remained, so I suspect that the problem is a poorly cleaned file or an actual corrupted ECU.
If anyone has another proven solution, please help.

[al70]

here's ultraprog solution to try

[tyrystorek35]

here's ultraprog solution to try

Not working B1193 U3000 B1A55

To sum up: the file P31658440 95128_OK_11/09/2023.rar and Clear2.rar from VasyaUA clear the error B1193 crash event storage full and locked but the fault U3000 control module and B1A55 Crash record output remain. The remaining files do not resolve fault B1193 U3000 B1A55.

[mechanior2686]

I asked you to check this file but you are smarter, I made 100 of these drivers with this number, if you knew, the VIN in this driver is rewritten itself from the car I wanted to help but it's a waste of my time , These drivers can break down on the U3000, but if you write that you are afraid to upload my file that you will mess it up, I forego further help.

[tyrystorek35]

I asked you to check this file but you are smarter, I made 100 of these drivers with this number, if you knew, the VIN in this driver is rewritten itself from the car I wanted to help but it's a waste of my time , These drivers can break down on the U3000, but if you write that you are afraid to upload my file that you will mess it up, I forego further help.

Please don't be offended, I didn't know you could upload a file from another ecu. I'll try it and let you know. In any case, the second file from VasyaUA seems to be ok. The only errors that cannot be deleted are B0070, B0072, B0079, which concern the driver's and passenger's belt tensioners. Plugging in a 2.2 ohm resistor has no effect. The belt tensioners reinstallation procedure does not want to start. The belts with tensioners have been repaired, the company swears that they are made well.
Thank you very much for your help.

[mechanior2686]

If you have an error with the tensioner, check it in the attachment, unscrew the plastics on the driver's and passenger's seats and let me know, The one in the photos is the factory action when fired