Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

NBT EVO ID5/6 Changing Adjust Block
12-09-2023, 07:04 AM, (This post was last modified: 12-09-2023, 07:06 AM by ferrytan25.)
Post: #1
XZBMW  NBT EVO ID5/6 Changing Adjust Block
Recently i got NBT EVO from my friend, asking to clear V850.
i did clear V850 and Nand using Tool32.

but when i want to flash the unit, it always failed at SWFL_0000271A_006_016_002
failed with both HTTP and UDS

when i take a look at HWEL_00002FC3_001_004_001 i notice that it not supposed to have GPS port.
somebody retrofit the GPS port and changing the adjust block.

i have follow steps to change adjust block, but always failed
i extract the adjustblock using sysetadjread then copy .bin file to USB, edit adjustblock using HU Tool, write it back from HU Tool.

the reason i am not using HU Tool to read adjust block because it always give me error transfering data.

can somebody explain how to write back edited adjust block to NBT EVO using SSH or maybe another method?


here is the error i got when try to flash the unit

MCDDiagService<id=333200, job=com.bmw.psdz.jobs.http.MCD3_PerformECUFlash_Http, service=RC_CHECK_MEMORY_HTTP - RoutineControl CheckMemoryHttp, description=error: positive response with negative content, link=HU_NBT2_63_ETHERNET_63> [DIAGSERVICE]
[HU_NBT2 - 63 - swfl_0000271a-006_016_002] Transaction type: swDeploy; Message: 100% progress on ECUId:HU_NBT2_0x63 [100% of swfl_0000271a-006_016_002] [TRANSACTION]
[] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR
[THROWABLE]
[HU_NBT2 - 63 - swfl_0000271a-006_016_002] Transaction type: swDeploy; Message: TA finished [TRANSACTION]
[HU_NBT2 - 63] There was an error during TAL execution, please check the log files. [WARN]
[HU_NBT2 - 63] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR

[HU_NBT2 - 63] finalizeECUFlash started [PROGRESS]
[HU_NBT2 - 63] finalizeECUFlash finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - HU_NBT2 - 63] job failed with negative response error:
code: result of the routine control service is not correct
description: service RoutineControl CheckMemoryHttp returned unexpected result: debugInformation_02_FF; LinkName: HU_NBT2_63_ETHERNET_63
severity: FATAL ERROR

Update:

i have check the DVD and HDD, it's working
i also managed to get DVD and middle board from another unit to flash it, but still got the same error.

i write Adjust Block using HU Tool, but when i checked it again, nothing changed..

i managed to flash another file by excluding 271A from SVT


Attached Files Thumbnail(s)
   
adjbackup HU EVO.bin.txt
File Type: .txt
Downloaded: 38 times
Size: 1.99 KB


[Image: pcidea.gif]THANKS and REP doesn't hurt
https://www.instagram.com/meisterbmw/
Retrofit, Wiring, Performance Parts, Coding, etc
Quote this message in a reply
12-09-2023, 08:40 AM,
Post: #2
RE: NBT EVO ID5/6 Changing Adjust Block
Hi

you have to search in forum,check my post :
https://cartechnology.co.uk/showthread.p...517&page=2

  • FSC Patch CIC/NBT/EVO/ENAV2/MGU
  • Remove Component Protection EVO/ENAV2/MGU
  • VIRGIN KAFAS/RAM/ENAV2/EVO/MGU
  • VIRGIN EGS ZF / DCT
  • Secure Coding 2.0 Type Key, FA, SFA

Please Hit Thanks [Image: tyl_add.png] and Reputation [Image: postbit_reputation.gif] if I helped you under
Quote this message in a reply
[+] 1 user says Thank You to sameur10 for this post
12-09-2023, 10:05 AM,
Post: #3
RE: NBT EVO ID5/6 Changing Adjust Block
(12-09-2023, 08:40 AM)sameur10 Wrote:  Hi

you have to search in forum,check my post :
https://cartechnology.co.uk/showthread.p...517&page=2

Hi, thank you for the info.
i have searched the forum found a couple thread like this but there is no clear explanation on how to edit adjust block and write it back to EVO.

been struggling with this case for a few days now.

i have extract the adjustblock.bin, is there any complete steps to write back to EVO.

[Image: pcidea.gif]THANKS and REP doesn't hurt
https://www.instagram.com/meisterbmw/
Retrofit, Wiring, Performance Parts, Coding, etc
Quote this message in a reply
12-09-2023, 12:37 PM,
Post: #4
RE: NBT EVO ID5/6 Changing Adjust Block
Write attached adjblock file (off gps and checksum calculation)


Attached Files
off gpp_adjbackup HU EVO.bin.txt
File Type: .txt
Downloaded: 53 times
Size: 1.99 KB


- Secure coding (NCD 2.0) fit to FA changed (Typschlussel, Serie, Region...).
- ID8.5 (SFA) conversion/ change region map.
- Virgin Kafas4, MRR, RAM used.
- Mgu patch, fsc custom match to vin, remove CP.
- Reset ISN 7DTC, 8HP for F, G serie (include EGS7).
- Write ISN MG1/MD1 with remotely.
- Carplay/Android Auto MGU with/without ATM (6AE).
Skype live:laquangksxd
Quote this message in a reply
[+] 1 user says Thank You to laquangksxd for this post
12-09-2023, 13:04 PM,
Post: #5
RE: NBT EVO ID5/6 Changing Adjust Block
(12-09-2023, 12:37 PM)laquangksxd Wrote:  Write attached adjblock file (off gps and checksum calculation)

Thank you so much.
i managed to write edited bin to EVO with sysetv850io using secureCRT and copy file using SCP..

i will write full procedure here for anyone with the same issue..

[Image: pcidea.gif]THANKS and REP doesn't hurt
https://www.instagram.com/meisterbmw/
Retrofit, Wiring, Performance Parts, Coding, etc
Quote this message in a reply
[+] 2 users say Thank You to ferrytan25 for this post
14-10-2023, 02:20 AM,
Post: #6
RE: NBT EVO ID5/6 Changing Adjust Block
ferrytan25 dateline='[url=tel:1694523842' Wrote:  1694523842[/url]']
laquangksxd dateline='[url=tel:1694522249' Wrote:  1694522249[/url]']
Write attached adjblock file (off gps and checksum calculation)

Thank you so much.
i managed to write edited bin to EVO with sysetv850io using secureCRT and copy file using SCP..

i will write full procedure here for anyone with the same issue..

Having the exact same problem and same fail at flash error, please share how it was solved
Quote this message in a reply
20-02-2024, 18:30 PM,
Post: #7
RE: NBT EVO ID5/6 Changing Adjust Block
(14-10-2023, 02:20 AM)naderlouis Wrote:  Having the exact same problem and same fail at flash error, please share how it was solved

I guess the way the OP has solved this is by writing the correct adjust block for the particular headunit. He said that there was the GPS value set in the adjust block, whereas the headunit does not have a GPS chip. Now when Esys write the 271A SWFL, part of it checks for the GPS value, if it has a value, then it will try to flash the firmware for that GPS chip, but since there is no chip, ESYS throws an error and fails the flash in its entriety.

If you still need help to restore, we will need to see at which SWFL/BTLD part of the flash is failing so we will have an understanding what the issue is.

BMW/MINI NBT and NBT EVO ID4,5,6 hardware repairs.  laughing

NBT EVO ID4 -> ID6 stable with full screen carplay  biker

KOMBI virginisation  enjoy
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
XZBMW need ista 3.55.11 standalone, for changing AGR rate sathunter 7 310 06-03-2024, 23:58 PM
Last Post: wrp_199
  Changing adjustblock alexnaoumov 69 8,375 28-02-2024, 22:47 PM
Last Post: Rajco
  Bmw f33 f82 Cabrio Adjust the convertible roof budddyyy 0 90 25-01-2024, 18:04 PM
Last Post: budddyyy
XZBMW g20 driver's switch block redog4dy 5 357 23-11-2023, 19:25 PM
Last Post: redog4dy
  NBT EVO changing stations randomly jaramillo 0 217 13-07-2023, 03:08 AM
Last Post: jaramillo
XZBMW Problem in BMW F36 changing typschlussel in FA number7 5 369 07-07-2023, 06:52 AM
Last Post: Siki78
XZBMW changing cas3+ frequency from 315 to 434 mercuris 24 2,063 04-03-2023, 12:38 PM
Last Post: ____ANGEL___
XZBMW Adjust block DEJMIEN 2 629 16-01-2023, 05:44 AM
Last Post: sammy3502
XZBMW Re:(Solved) ISTA 4.19.40 error message block port 12300 wademan 10 1,939 07-10-2022, 13:50 PM
Last Post: bmwm3power
XZBMW E65 Changing voice commands language from german to english rana 11 1,201 30-09-2022, 05:41 AM
Last Post: joz

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content