[Bult]

Hi,
I have a rather interesting case, the navigation did not turn on (black screen) - after uploading the SGL016, SGL032, Internal, external, EE files, the navigation came to life in the Service mode, SWL Mode, and Normal mode. Unfortunately, in the normal mode as in the attached image, you cannot read the information about coding, Downgrade cannot be run.
It does not accept software from CD. At low SW (1100, 3980) - Error downgrade, at software 4120, 5238 Error reading HW Version.
The radio coding area is obviously damaged, but I don't know which memory is responsible for it? Has anyone had a similar case?

[Palaghia77]

Disable MPEG and try again!

[Bult]

I can't encode anything with MPEG, when I try to save anything there is a library error. I think it's not a problem with this codec because after inserting the disc, the error appears immediately, not when flashing the MPEG codec

[VasyaUA]

Hi,
I have a rather interesting case, the navigation did not turn on (black screen) - after uploading the SGL016, SGL032, Internal, external, EE files, the navigation came to life in the Service mode, SWL Mode, and Normal mode. Unfortunately, in the normal mode as in the attached image, you cannot read the information about coding, Downgrade cannot be run.
It does not accept software from CD. At low SW (1100, 3980) - Error downgrade, at software 4120, 5238 Error reading HW Version.
The radio coding area is obviously damaged, but I don't know which memory is responsible for it? Has anyone had a similar case?

Do you have a proven working pair? As an option, try to transfer to the service menu, and then delete swll and the entire history and try to start the update through 3 butt

[Bult]

What couple are you talking about? I have already deleted SWL, unfortunately it doesn't help, it's as if the system containing the data shown at the top in the setconfig screenshot was damaged, but which one?
SGL 16 is responsible for booting SWL. And who stores this data? Now I got the second unit, all coding data was saved except for the CD Changer - it was simply empty, it was impossible to encode after cleaning the NAND, the same error as above "Error loading coding library", i.e. the same system is damaged, but which one is it?

[VasyaUA]

What couple are you talking about? I have already deleted SWL, unfortunately it doesn't help, it's as if the system containing the data shown at the top in the setconfig screenshot was damaged, but which one?
SGL 16 is responsible for booting SWL. And who stores this data? Now I got the second unit, all coding data was saved except for the CD Changer - it was simply empty, it was impossible to encode after cleaning the NAND, the same error as above "Error loading coding library", i.e. the same system is damaged, but which one is it?

Are your dumps working? Try replacing the cd drive rns and using the dvd disk and firmware 5238 Josi mod in the 3 button update

[Bult]

I used my 3970 dumps in earlier units. I can't enter SWL mode with 3 buttons. Using Set Config, I enter the unit in Service mode and then in "Next boot mode" I select SWL Mode and restart, then the unit is in SWL mode. The drive is also my service one, which I use every day. I tried 5238 by Yosi on DVD and CD, same effect. The only thing that comes to my mind is to upload a higher version to S29AL16 and S29GL32, the first one I have from version 5238, unfortunately I need it for S29GL32, does anyone have such a dump?

[VasyaUA]

I used my 3970 dumps in earlier units. I can't enter SWL mode with 3 buttons. Using Set Config, I enter the unit in Service mode and then in "Next boot mode" I select SWL Mode and restart, then the unit is in SWL mode. The drive is also my service one, which I use every day. I tried 5238 by Yosi on DVD and CD, same effect. The only thing that comes to my mind is to upload a higher version to S29AL16 and S29GL32, the first one I have from version 5238, unfortunately I need it for S29GL32, does anyone have such a dump?

Take a photo of the rns tag