Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

Peugeot 407 transmission automatic
21-06-2015, 15:34 PM,
Post: #1
PPeugeot  Peugeot 407 transmission automatic
Hi
i wash the motor of my car peugeot 407 ,it start , but doesn't move (depart)
it writ in the dashbord D WHEN I CHANGE it write all rapport ,but doesn't move.
when i did diagnostic it gave me fault code P0765
please help me
Quote this message in a reply
21-06-2015, 22:37 PM,
Post: #2
RE: Peugeot 407 transmission automatic
Shift solenoid(ss)D circuit mlfunction
Quote this message in a reply
21-06-2015, 22:50 PM,
Post: #3
RE: Peugeot 407 transmission automatic
(21-06-2015, 15:34 PM)ucforstill Wrote:  Hi
i wash the motor of my car peugeot 407 ,it start , but doesn't move (depart)
it writ in the dashbord D WHEN I CHANGE it write all rapport ,but doesn't move.
when i did diagnostic it gave me fault code P0765
please help me

Possible causes
- Low transmission fluid level
- Dirty transmission fluid
- Faulty shift solenoid 'D' valve
- Shift solenoid 'D' valve harness or connectors
- Shift solenoid 'D' valve circuit is open or shorted


The P0765 code is detected when the ECM detects an improper voltage drop when it tries to operate the solenoid valve.

Possible symptoms
- Engine Light ON (or Service Engine Soon Warning Light)
- Transmission will not shift gears
P0765 Description

Shift solenoid valve 'D' is turned ON or OFF by the Transmission Control Module (TCM) in response to signals sent from the park/neutral position (PNP) switch, vehicle speed and Engine Control Module (ECM) (throttle opening). Gears will then be shifted to the optimum position.
Quote this message in a reply
23-06-2015, 19:38 PM,
Post: #4
PPeugeot  RE: Peugeot 407 transmission automatic
(21-06-2015, 15:34 PM)ucforstill Wrote:  Hi
i wash the motor of my car peugeot 407 ,it start , but doesn't move (depart)
it writ in the dashbord D WHEN I CHANGE it write all rapport ,but doesn't move.
when i did diagnostic it gave me fault code P0765
please help me

check the connector on gearbox if it is ok you have problem with gearbox
Quote this message in a reply
13-08-2015, 19:56 PM,
Post: #5
PPeugeot  RE: Peugeot 407 transmission automatic
If you vehicle was working alright before washed,then it could be water had penitrated into the gearshift solonoid disconnect the harness and dry it ,if problem persist then change the gearshift solonoid afterwards hook pp2000or diagbox read and clear fault code then initialise autoadaptive

ONLY THE CURIOUS DISCOVERS THE SECRET BEHIND IT
Quote:
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
PPeugeot BSI Peugeot 5008 Abu Ameer 2 138 02-02-2024, 08:41 AM
Last Post: apol
PPeugeot Peugeot 308 2012 1.6 hdi 68kw service manual and wiring diagram boki 1 192 12-01-2024, 14:07 PM
Last Post: windy1603
PPeugeot NEED BSI WIRING DIAGRAM PEUGEOT PARTNER 1.6 BLUEHDI 2016 ToolSet 0 118 06-01-2024, 16:50 PM
Last Post: ToolSet
  Peugeot 308 T9 Automatic gearbox wiring min2xx 0 109 06-01-2024, 09:48 AM
Last Post: min2xx
  need wiring diagram for peugeot 308 2018 diesel TKservice 1 105 04-01-2024, 22:12 PM
Last Post: Liteace
PPeugeot VIN Check Please peugeot boki 0 107 04-12-2023, 18:57 PM
Last Post: boki
  Peugeot Partner Window problem emifive 1 189 20-11-2023, 15:22 PM
Last Post: emifive
PPeugeot BSI PEUGEOT 9651041480 LEAR Fabio 6 361 16-11-2023, 22:20 PM
Last Post: Fabio
  2011 Peugeot 207 1.4 hdi ECU update for P1490 fix jamesworts 5 419 13-09-2023, 21:06 PM
Last Post: jamesworts
  Peugeot 308 T9 Aisin gearbox schematics raduandrei82 8 806 27-08-2023, 18:22 PM
Last Post: raduandrei82

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content