ATTENTION !! Users which have not any posts were deleted !
  1. New Emulator

  2. Julie Emulator

  3. Immo Bypass

  4. AUTO-CHIPS

  5. HEXPROG

  6. moe diatronik



parking sensors are switched on automatically
04-05-2021, 12:34 PM, (This post was last modified: 04-05-2021, 20:14 PM by Sorani.)
Post: #1
ZTAudi  parking sensors are switched on automatically
Hi,

how can I do the coding so that the parking sensors are switched on automatically "not from the button" when my A7 4G 2016 approaches an obstacle, in front For example a wall.
Coding occurs in Audi A7 4K 2018 in apps as automatic PDC activation. So it is possible to do it?

greetings
Quote this message in a reply
04-05-2021, 17:11 PM, (This post was last modified: 04-05-2021, 17:15 PM by tomtomek.)
Post: #2
RE: parking sensors are switched on automatically
Hi
In the central electrics, look for the 09 module.
I activated in a5 b9 2018
check 09 central electrics
long coding byte 37 bit 1
Quote this message in a reply
04-05-2021, 18:58 PM,
Post: #3
ZTAudi  RE: parking sensors are switched on automatically
Hello thanks for your answer, but its not working with it i have tested now.
Quote this message in a reply
05-05-2021, 07:21 AM,
Post: #4
RE: parking sensors are switched on automatically
with VCDS is possible ?
Quote this message in a reply
05-05-2021, 13:49 PM,
Post: #5
RE: parking sensors are switched on automatically
I have tested it on vcds to and its not working,
Quote this message in a reply
05-05-2021, 14:38 PM, (This post was last modified: 05-05-2021, 14:47 PM by urgi.)
Post: #6
RE: parking sensors are switched on automatically
edit find some info  maybe will work ....


Activate the automatic parking function
In the control unit of the parking aid, you have the option to activate the automatic activation on the Audi A3 8V and the built-in APS + (front and rear). Moving forward on an obstacle, the APS + detects this and signals the distances over the MMI both visually and acoustically.
The following coding must be used:
Select STG 10 (parking aid)
STG Access authorization function 16
Enter access code 71679
STG coding -> Select function 07
Byte 3
Activate bit 4
Quote this message in a reply
05-05-2021, 16:01 PM,
Post: #7
RE: parking sensors are switched on automatically
(05-05-2021, 14:38 PM)urgi Wrote:  edit find some info  maybe will work ....


Activate the automatic parking function
In the control unit of the parking aid, you have the option to activate the automatic activation on the Audi A3 8V and the built-in APS + (front and rear). Moving forward on an obstacle, the APS + detects this and signals the distances over the MMI both visually and acoustically.
The following coding must be used:
Select STG 10 (parking aid)
STG Access authorization function 16
Enter access code 71679
STG coding -> Select function 07
Byte 3
Activate bit 4

Your coding for A3, not for A7
Module STG 09 in A7

If you like my post and it helped you, press Thanks or give reputation rating
Quote this message in a reply
06-05-2021, 08:03 AM, (This post was last modified: 06-05-2021, 08:04 AM by urgi.)
Post: #8
RE: parking sensors are switched on automatically
Your info audia4  is wrong wink


here is my A7 didn't try yet but will report later

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
05-Acc/Start Auth. -- Status: OK 0000
06-Seat Mem. Pass -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
10-Park/Steer Assist -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
30-Special Function II -- Status: OK 0000
34-Level Control -- Status: OK 0000
36-Seat Mem. Drvr -- Status: OK 0000
3B-Sensor Elect. -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
53-Parking Brake -- Status: OK 0000
55-Xenon Range -- Status: OK 0000
56-Radio -- Status: OK 0000
5F-Information Electr. -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
69-Trailer -- Status: OK 0000
6C-Back-up Cam. -- Status: OK 0000
6D-Trunk Elect. -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
82-Heads Up Display -- Status: OK 0000
88-Multicont. Seat Driver -- Status: OK 0000
89-Multicont. Seat Pass. -- Status: OK 0000
Quote this message in a reply
06-05-2021, 10:18 AM,
Post: #9
RE: parking sensors are switched on automatically
hope any of you can help me because I really need it
thanks
Quote this message in a reply
06-05-2021, 12:07 PM, (This post was last modified: 06-05-2021, 12:22 PM by urgi.)
Post: #10
RE: parking sensors are switched on automatically
I have spare 5min and I try change codding in 10-Park/Steer Assist  - in byte 3  bit 3 from Original 0 to 1 after  reset MMI but still not working hmmm

I have A7 2011  - will drive few days and will see

[Image: Capture-1.png]

and I checked 

~ check 09 central electrics - long coding byte 37 but I haven't byte 37 ~
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  RCD510 does not turn on. It shows only parking sensors and climate control. mahouni53 8 1,821 30-11-2020, 16:05 PM
Last Post: mahouni53

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content