Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
f25 n52 msv90 burning fuse f02
20-09-2023, 13:58 PM,
Post: #1
|
|||
|
|||
f25 n52 msv90 burning fuse f02
hello, have a car with the very strange issue, keeps blowing F02 fuse in DME in the integrated supply module which causes no start engine.
According to newtis f02 responsible for 15n2 terminal. we have no faults at all, we have exchanged engine ecu, not helped. replaced both disa actuators in intake, this helped for 2 weeks, now again keep blowing the fuse. With blown fuse engine work, it's causing only no crank, any hints? BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
20-09-2023, 14:43 PM,
Post: #2
|
|||
|
|||
RE: f25 n52 msv90 burning fuse f02
Could you please post the VIN?
|
|||
20-09-2023, 15:30 PM,
Post: #3
|
|||
|
|||
RE: f25 n52 msv90 burning fuse f02
This is common issue on these msv90. I have repaired many. The capacitors leak fluid and damage the pcb traces. If you open the ecu you will see. But be very careful when separating the board from the bottom half. I tends to flex and cause whole lot of other issues later.. good luck..
|
|||
20-09-2023, 17:25 PM,
Post: #4
|
|||
|
|||
RE: f25 n52 msv90 burning fuse f02
Seems found issue, one of liambda heater has shortcircuit, disconnected liambda, and fuse okey
BMW FSC RETROFIT PACK: CIC / NBT / NBTevo ID4/5/6 entryevo
Carplay NBTEVO, ENTRYEVO, MGU MAPS codes for maps: Premium - Motion - Move - Route - Next - Evo - Way Best prices PM |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
BMW Fuse-Cards Online | M-Simon | 1 | 301 |
15-03-2024, 20:07 PM Last Post: Stratofortress |
|
Solved ✔ msv90 dtc off | MPTeam | 1 | 220 |
04-11-2023, 15:53 PM Last Post: MPTeam |
|
E91 2006 n46 CID fuse location | boweld11 | 2 | 263 |
02-04-2023, 19:11 PM Last Post: grzesiek2304 |
|
Solved ✔ Issue of 2011 F10 DME(MSV90) | ga3 | 7 | 755 |
10-01-2023, 06:40 AM Last Post: ga3 |
|
G31 cigarette plug front - which fuse? | remcar | 1 | 236 |
10-12-2022, 05:54 AM Last Post: simonchs |
|
Location Fuse 102 in a 2008 X3 E83 | jacksegundo | 8 | 738 |
08-11-2022, 03:42 AM Last Post: crazybm |
|
MSV90 cloning by hexprog | lustek | 32 | 3,316 |
19-09-2022, 18:18 PM Last Post: lustek |
|
MSV90 cloning | MPTeam | 3 | 617 |
12-07-2022, 11:53 AM Last Post: bmchicago |
|
G80 2021_ fuse box_layout | Wojti77 | 1 | 421 |
10-05-2022, 11:05 AM Last Post: Czozen |
|
repair dme msv90 cranking but no start | prikitiew | 6 | 934 |
15-03-2022, 10:28 AM Last Post: tintoverano |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content