[fluorescent]

Hi auto brothers.
Have a big strugglling here with aGolf 5 ecu bosch Me7.1.1 7802 022906032CD.
Owner try to read the ecu by kess clone and get messed with the ecu integrity.
I can read the ecu in boot mode by ktag(clone) but is give me ECU NOT IDENTIFIED and give me a list to choose a plugin and force me to make a full backup.
I have from ecuconnections site the 3 files acording to my ecu by serial number, i write the flash outside and eeprom with external programmer.
also the ST10F275 micro.
I can connect on bench ecu by kline but i see no VIN no hw id only    
022906032CD.
I can t write file back by ktag, one by one , everytime have operation not alowed.
If i write back full backup is writed well only full backup.
Can somebody check my file pls?
i have from original ecu only st10f275 micro file and eeprom file the flash ktag not let me saved always get checksum error.
i atached the micro st10f275 content and eeprom if somebody have a fullbackup of this ecu to write by ktag please or repair my file.

ST10F275 ORI 022906032CD.rar
File Type:
Downloaded:	4 times
Size:	269.48 KB

bin file 91560 eeprom read by owner vw golf r32.rar
File Type:
Downloaded:	4 times
Size:	465 bytes

MYy ecu is like this pics.rar
File Type:
Downloaded:	5 times
Size:	1.94 MB

I have also the flash file AM29F800BB but is from another ecu mine i cannot save it as chksum error gived by ktag.

[elektronik13]

Hi auto brothers.
Have a big strugglling here with aGolf 5 ecu bosch Me7.1.1 7802 022906032CD.
Owner try to read the ecu by kess clone and get messed with the ecu integrity.
I can read the ecu in boot mode by ktag(clone) but is give me ECU NOT IDENTIFIED and give me a list to choose a plugin and force me to make a full backup.
I have from ecuconnections site the 3 files acording to my ecu by serial number, i write the flash outside and eeprom with external programmer.
also the ST10F275 micro.
I can connect on bench ecu by kline but i see no VIN no hw id only    
022906032CD.
I can t write file back by ktag, one by one , everytime have operation not alowed.
If i write back full backup is writed well only full backup.
Can somebody check my file pls?
i have from original ecu only st10f275 micro file and eeprom file the flash ktag not let me saved always get checksum error.
i atached the micro st10f275 content and eeprom if somebody have a fullbackup of this ecu to write by ktag please or repair my file.


I have also the flash file AM29F800BB but is from another ecu mine i cannot save it as chksum error gived by ktag.

share flash file

[Petro68]

MPPS READ WRITE THIS ECU PERFECT
REGARDS

[al70]

I think your ECU doesn't have original file , I had this problem with ksuite when I tried to write tuned file to ECU that already had tuned file installed, I had to write original file back first, before I could write New tuned file, hope this helps

[fluorescent]

Hi auto brothers.
Have a big strugglling here with aGolf 5 ecu bosch Me7.1.1 7802 022906032CD.
Owner try to read the ecu by kess clone and get messed with the ecu integrity.
I can read the ecu in boot mode by ktag(clone) but is give me ECU NOT IDENTIFIED and give me a list to choose a plugin and force me to make a full backup.
I have from ecuconnections site the 3 files acording to my ecu by serial number, i write the flash outside and eeprom with external programmer.
also the ST10F275 micro.
I can connect on bench ecu by kline but i see no VIN no hw id only    
022906032CD.
I can t write file back by ktag, one by one , everytime have operation not alowed.
If i write back full backup is writed well only full backup.
Can somebody check my file pls?
i have from original ecu only st10f275 micro file and eeprom file the flash ktag not let me saved always get checksum error.
i atached the micro st10f275 content and eeprom if somebody have a fullbackup of this ecu to write by ktag please or repair my file.


I have also the flash file AM29F800BB but is from another ecu mine i cannot save it as chksum error gived by ktag.

share flash file

is not the ori file i found it on internet

FLASH ORI 022906032CD.rar
File Type:
Downloaded:	3 times
Size:	100.1 KB

[fluorescent]

I think your ECU doesn't have original file , I had this problem with ksuite when I tried to write tuned file to ECU that already had tuned file installed, I had to write original file back first, before I could write New tuned file, hope this helps

you have a backup of this ecu by ksuite or ktag?
is the only way to write the ecu by ktag

[elektronik13]

Hi auto brothers.
Have a big strugglling here with aGolf 5 ecu bosch Me7.1.1 7802 022906032CD.
Owner try to read the ecu by kess clone and get messed with the ecu integrity.
I can read the ecu in boot mode by ktag(clone) but is give me ECU NOT IDENTIFIED and give me a list to choose a plugin and force me to make a full backup.
I have from ecuconnections site the 3 files acording to my ecu by serial number, i write the flash outside and eeprom with external programmer.
also the ST10F275 micro.
I can connect on bench ecu by kline but i see no VIN no hw id only    
022906032CD.
I can t write file back by ktag, one by one , everytime have operation not alowed.
If i write back full backup is writed well only full backup.
Can somebody check my file pls?
i have from original ecu only st10f275 micro file and eeprom file the flash ktag not let me saved always get checksum error.
i atached the micro st10f275 content and eeprom if somebody have a fullbackup of this ecu to write by ktag please or repair my file.


I have also the flash file AM29F800BB but is from another ecu mine i cannot save it as chksum error gived by ktag.

share flash file

is not the ori file i found it on internet

this file is OK, you can save it to the ECU

[fluorescent]

Hi auto brothers.
Have a big strugglling here with aGolf 5 ecu bosch Me7.1.1 7802 022906032CD.
Owner try to read the ecu by kess clone and get messed with the ecu integrity.
I can read the ecu in boot mode by ktag(clone) but is give me ECU NOT IDENTIFIED and give me a list to choose a plugin and force me to make a full backup.
I have from ecuconnections site the 3 files acording to my ecu by serial number, i write the flash outside and eeprom with external programmer.
also the ST10F275 micro.
I can connect on bench ecu by kline but i see no VIN no hw id only    
022906032CD.
I can t write file back by ktag, one by one , everytime have operation not alowed.
If i write back full backup is writed well only full backup.
Can somebody check my file pls?
i have from original ecu only st10f275 micro file and eeprom file the flash ktag not let me saved always get checksum error.
i atached the micro st10f275 content and eeprom if somebody have a fullbackup of this ecu to write by ktag please or repair my file.


I have also the flash file AM29F800BB but is from another ecu mine i cannot save it as chksum error gived by ktag.

share flash file

is not the ori file i found it on internet

this file is OK, you can save it to the ECU

is not the file is that the ktag when i have to write only flas is tell me operation not alowed.
only i can write a full backup with succes.
also is not recognize hw id when i try to read and only alow me a list to choose plugin and make a full backup.