[lacost]

Someone knows the address where the mileage is stored in the EEPROM in FRM3?

From this project I found VIN address (0xFD3)


But, looking at the dump, I can't guess where the mileage is.

[user0086]

I've spend hours analysing dumps but couldn't find it. Now, i'm convinced it is not there, only in the uif there will be the mileage at which it was last updated.

[BmwMerc]

Yes there is known location with a mileage in FRM3 of course.
And I probably would be happy to share it with you, but your profile reputation is at 0.
Not sure if its good idea to share it at this point.
So if you could contribute to the forum a little bit or you have something in exchange then no problem.

Someone knows the address where the mileage is stored in the EEPROM in FRM3?

From this project I found VIN address (0xFD3)


But, looking at the dump, I can't guess where the mileage is.

[badenaleks]

Also, you can use BMW Explorer to reset to 0, because not only FRM has millege. In my opinion, the best way to do this is by obd.

[lacost]

Also, you can use BMW Explorer to reset to 0, because not only FRM has millege. In my opinion, the best way to do this is by obd.

I know that millege in cas, kombi, frm and dme

I didn't have BMWExp...
Do you know command to reset to 0 by odb ( throw tool32)?

[user0086]

I think BMW explorer just shows the mileage from the UIF, which will be overwritten by an update since FRM3 only has 1 UIF slot.

[johann74270]

Yes there is known location with a mileage in FRM3 of course.
And I probably would be happy to share it with you, but your profile reputation is at 0.
Not sure if its good idea to share it at this point.
So if you could contribute to the forum a little bit or you have something in exchange then no problem.

Someone knows the address where the mileage is stored in the EEPROM in FRM3?

From this project I found VIN address (0xFD3)


But, looking at the dump, I can't guess where the mileage is.

Hello 
I would like to know her please