[marnpl]

Hello guys

I have a toyota rav4 20d 1ADFTV 2013 engine


sw: 89663-42F90
spare : 89661-42J40
sw upg: 342F9000


my problem is dpf

No dtc no smoke problem is dpf on dash full service !!!

I NEED it running with the dpf off and no warning on the dash

I tried many solutions but none of them showed a warning on the screen
have a Toyota RAV4 (2014) 2.0 (1AD-FTV) with an ash accumulation ratio of over 500%.
Dpf was removed and cleaned, pressure is ok now but ash build up is around 280% and won't reset. Tried teachstream but no luck.
With this percentage of ash build-up it will not do regeneration.
If I enable the PM to regenerate it will show as running but when I hit the throttle it will exit and show complete.

[AmgMpower]

pass after rep and thanks

[YGRemaps]

Hello guys

I have a toyota rav4 20d 1ADFTV 2013 engine


sw: 89663-42F90
spare : 89661-42J40
sw upg: 342F9000


my problem is dpf

No dtc no smoke problem is dpf on dash full service !!!

I NEED it running with the dpf off and no warning on the dash

I tried many solutions but none of them showed a warning on the screen
have a Toyota RAV4 (2014) 2.0 (1AD-FTV) with an ash accumulation ratio of over 500%.
Dpf was removed and cleaned, pressure is ok now but ash build up is around 280% and won't reset. Tried teachstream but no luck.
With this percentage of ash build-up it will not do regeneration.
If I enable the PM to regenerate it will show as running but when I hit the throttle it will exit and show complete.

Here is my manual solution and 100% working let tool to make checksums