[rautolock]

Hi everyone. I need an eeprom dump for BDC.

I was trying to change the vin with Abrites, but it did not completed and corrupted the eeprom and part of the flash. I still have communication but I cannot reflash it. I will attend to repair with im508 repair function.

[rautolock]

I just need the eeprom dump from any BDC. It does not have to be from a mini.
M95256

[tigre]

hi, see is this help

regards

[rautolock]

I was able to fix it with VVDI2.

I followed the steps in autel im508, but it didn't work so I tried the same steps with vvdi2 and I was able to reflash it.

Step 1: Remove EEPROM
Step 2: Solder EEPROM to a adapter board with pins
Step 3: Solder Dupont wires to main board pads. Do not connect EEPROM.
Step 4: On bench, connect and power up BDC and stablish connection.
Step 5: Once connection is stablish, wired up the eeprom adapter to the main board.
Step 6: attempt reprogramming the BDC. If does not start the reprogramming process, power off, disconnect eeprom, power on, stablish odb connection, connect eeprom, and try again

the idea is to stablish connection with the tool while the eeprom is removed from the board and then reattach the eeprom while maintaining that connection.