[donjuan020]

We managed to achieve FDL to make KOMBI ALPINA on our G30. FDL is not successful. Later, he tried to carry out CAFD studies with ESYS. Now it does not accept CAFD to connect. Has anyone encountered such a problem? Now COMBI CAFD ^^FFF^^.

DOES ANYONE HAVE AN IDEA?

Caf's suchen
Tal wird generiert
Abarbeitung wird gestartet

Read SVT before TAL execution started.
Read SVT before TAL execution finished.

TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
ExecutionID=2023/10/07-13:28:50.211
[] prepareTALExecution started [PROGRESS]
[] prepareTALExecution finished [PROGRESS]
[] prepareVehicleForCoding started [PROGRESS]
[] prepareVehicleForCoding finished [PROGRESS]
[DKOMBI2 - 60] prepareECUforCoding started [PROGRESS]
[DKOMBI2 - 60] prepareECUforCoding finished [PROGRESS]
[DKOMBI2 - 60] authenticateECUforCoding started [PROGRESS]
[DKOMBI2 - 60] authenticateECUforCoding finished [PROGRESS]
[DKOMBI2 - 60 - cafd_00002660-009_001_018] Transaction type: cdDeploy;  Message: TA started [TRANSACTION]
MCDDiagService<id=62651, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : securityAccessDenied, link=DKOMBI2_60_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR
[THROWABLE]
[DKOMBI2 - 60 - cafd_00002660-009_001_018] Transaction type: cdDeploy;  Message: TA finished [TRANSACTION]
[DKOMBI2 - 60] -MessageID is used multiple times, so MessageText may be ambiguous-job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR
[WARN]
[DKOMBI2 - 60] - [Exception - DKOMBI2 - 60] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR

[DKOMBI2 - 60] prepareECUforCoding started [PROGRESS]
[DKOMBI2 - 60] prepareECUforCoding finished [PROGRESS]
[DKOMBI2 - 60] authenticateECUforCoding started [PROGRESS]
[DKOMBI2 - 60] authenticateECUforCoding finished [PROGRESS]
[DKOMBI2 - 60 - cafd_00002660-009_001_018] Transaction type: cdDeploy;  Message: TA started [TRANSACTION]
MCDDiagService<id=62651, job=com.bmw.psdz.jobs.uds.MCD3_PerformECUCoding, service=WDBI_PLAIN - WriteDataByIdentifier with unlimited Data-ID (plain hex value), description=error: negative response : securityAccessDenied, link=DKOMBI2_60_ETHERNET> [DIAGSERVICE]
[] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR
[THROWABLE]
[DKOMBI2 - 60 - cafd_00002660-009_001_018] Transaction type: cdDeploy;  Message: TA finished [TRANSACTION]
[DKOMBI2 - 60] There was an error during TAL execution, please check the log files. [WARN]
[DKOMBI2 - 60] - [Exception - DKOMBI2 - 60] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR

[DKOMBI2 - 60] finalizeECUCoding started [PROGRESS]
[DKOMBI2 - 60] finalizeECUCoding finished [PROGRESS]
[] There was an error, please check the log files. [WARN]
[] - [Exception - DKOMBI2 - 60] job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code securityAccessDenied; LinkName: DKOMBI2_60_ETHERNET
severity: ERROR

[] finalizeVehicleCoding started [PROGRESS]
[] finalizeVehicleCoding finished [PROGRESS]
[] finalizeTALExecution started [PROGRESS]
[] finalizeTALExecution finished [PROGRESS]
TAL execution finished [TAL_EXECUTION_FINISHED]
TAL-Execution finished with status: "FinishedWithError". [C207]
TAL execution finished. Duration: "43s". [C206]

Read SVT after TAL execution started.
Read SVT after TAL execution finished.
Abarbeitung beendet

[jaramillo]

Hello, is FA correct?

[donjuan020]

Hello, is FA correct?

I couldn't see any mistakes.

[marcospoffo]

Are you using the launcher to inject cafd? use esys without the launcher.

[donjuan020]

Are you using the launcher to inject cafd? use esys without the launcher.

I tried this. it gives the same error.

[jaramillo]

Have you tried to flash kombi?

[donjuan020]

Have you tried to flash kombi?

I'm waiting for the latest version of psdzdata to download.

[Siki78]

Which cafd you are geting when you push "cafd for swe inject"?
Try to write manually cafd_00002660_009_001_020 and VO code DKOMBI

[redog4dy]

Which cafd you are geting when you push "cafd for swe inject"?
Try to write manually cafd_00002660_009_001_020 and VO code DKOMBI

sorry to ask you here, on another topic, but i have same problem with F01, 2009 , i cannot inject cafd for kafas1. 
How can be injected manual cafd? 

</ncd>
                <Throwable timestamp="20231005-133712.376" id="excep_3">
                    <MsgId>433</MsgId>
                    <MsgText>job failed with negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code generalProgrammingFailure; LinkName: KAFAS_5D_ETHERNET
severity: ERROR
</MsgText>
                    <MsgArgs>
                        <MsgArg>negative response error:
code: repeat job
description: Service WDBI_PLAIN returned a negative response with response code generalProgrammingFailure; LinkName: KAFAS_5D_ETHERNET
severity: ERROR
</MsgArg>

Thanks,

[Siki78]

Read FA then read ecu edit svt edit ecu write cafd you want and vo code