[davor.touch]

Hello,

have anyone good and correct pinout for iveco 38pin cable ?

i found at google but no one work , i would like conect delphi and iveco

ecu have the MS6.3

thanks

[Raidraid]

Hello,

have anyone good and correct pinout for iveco 38pin cable ?

i found at google but no one work , i would like conect delphi and iveco

ecu have the MS6.3

thanks

[davor.touch]

Hello,

have anyone good and correct pinout for iveco 38pin cable ?

i found at google but no one work , i would like conect delphi and iveco

ecu have the MS6.3

thanks

thanks

i conect all like this and i buy new one cable and pinout is correct but still can't conect ecu and delphi ... i try at 2 iveco .... rest cars i working normal with delphi ...

anyone maybe know what is the problem ?

thanks advance

[sisco]

Hello,

have anyone good and correct pinout for iveco 38pin cable ?

i found at google but no one work , i would like conect delphi and iveco

ecu have the MS6.3

thanks

This should help

[davor.touch]

Hello,

have anyone good and correct pinout for iveco 38pin cable ?

i found at google but no one work , i would like conect delphi and iveco

ecu have the MS6.3

thanks

This should help

thanks for picture . but i conect like this and no work

i check wires from conector of car to ecu and wires is OK , maybe ecu is problem ... ???

car starts OK , and working , only have some problem with regulator at pump... i think ... i'm not sure because i would like conect and heck faults

davor

[budjoni]

Autocom = pin 38

2 = 2 = K-line
4-5 = 30 = Gnd.
16 = 27 = +12v

Test & report!

[davor.touch]

Autocom = pin 38

2 = 2 = K-line
4-5 = 30 = Gnd.
16 = 27 = +12v

Test & report!

i will try and let you know works or not , maybe is problem ecu

[test01]

hello, did you solve the connection problem? I have an iveco 2.8 78kw and the diagnostics do not work