Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

New CANCLIP interface
26-10-2023, 12:58 PM,
Post: #11
RE: New CANCLIP interface
(25-10-2023, 20:03 PM)Gigan Wrote:  
(25-10-2023, 04:51 AM)mattydr67 Wrote:  What you find it is a different location don't you think?
Go to the location mentioned. In your oicture there is a different location.
Then I said to change "Vendor" and "Name"
Did I mention "FunctionLibrary"
I hope you understand what do I am telling you.

Good luck

Hi, I understand you good. There is NO such key in the registry of my laptop in same location: "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport\...."

Look please in the picture. How it must be installed? Or it must be created?

If u have windows x64 bit you need to modify in this section :
" Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04\Your device "
Quote this message in a reply
[+] 1 user says Thank You to gyenge for this post
26-10-2023, 17:59 PM,
Post: #12
RE: New CANCLIP interface
(26-10-2023, 07:21 AM)ortis Wrote:  From what I can see, it is not a j2534, but a Chinese shortened Clip. If You have a correctly installed Clip, Connect the OBD connector to the Car, turn on the Ignition, then connect the USB Cable to the Computer and the Drivers should install Themselves.

Regards

It seems I installed it: 

I removed completeely new CanClip V231 and istalled the one from seller's DVD with version V216. 
It has installed also a directory "Clipdriver_install" on my Desktop. It is located in C:\CLIP\CLIP\Installer_x64.exe.
After installation of those drivers windows (Win10,64bit) can see sonde as RTL2002 (see picture) in DeviceManager.
CanClip V216 software also recognises it like sonde with number 1972460032

Yes you are right, it looks like  a Chinese shortened Clip. 

I did not test it in real car yet, but I filled manually some VIN number, and software correctly found the car. Note, I did not connect it to 12V or to a car, I connected it only to PC. And only one red led lamp is lighting.
Later I will inform on test in real car


Attached Files Thumbnail(s)
           
Quote this message in a reply
[+] 1 user says Thank You to Gigan for this post
26-10-2023, 18:17 PM,
Post: #13
RE: New CANCLIP interface
Yes This is not the Full Chinese Clip. For Basic Biagnostics only
Quote this message in a reply
26-10-2023, 18:24 PM,
Post: #14
RE: New CANCLIP interface
(26-10-2023, 12:58 PM)gyenge Wrote:  
(25-10-2023, 20:03 PM)Gigan Wrote:  
(25-10-2023, 04:51 AM)mattydr67 Wrote:  What you find it is a different location don't you think?
Go to the location mentioned. In your oicture there is a different location.
Then I said to change "Vendor" and "Name"
Did I mention "FunctionLibrary"
I hope you understand what do I am telling you.

Good luck

Hi, I understand you good. There is NO such key in the registry of my laptop in same location: "HKEY_LOCAL_MACHINE\SOFTWARE\PassThruSupport\...."

Look please in the picture. How it must be installed? Or it must be created?

If u have windows x64 bit you need to modify in this section :
" Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04\Your device "

Hi, I opened that KEY in Registry as you say :
" Computer\HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\PassThruSupport.04.04\Your device "

It is already assigned to Vendor "79B" and Name "1B". It seems the Installer from Seller's DVD did it. See Picture. And device is PassThru


Attached Files Thumbnail(s)
   
Quote this message in a reply
26-10-2023, 21:50 PM,
Post: #15
RE: New CANCLIP interface
(26-10-2023, 18:17 PM)ortis Wrote:  Yes This is not the Full Chinese Clip. For Basic Biagnostics only

Can you please tell what it can do and what cannot in comparison with full CanClip?
Quote this message in a reply
27-10-2023, 11:29 AM,
Post: #16
RE: New CANCLIP interface
Basic Chinese Can Clip only supports Diagnostic Functions. Full Chip Chinese Clone supports Diagnostic functions and Component Programming
Quote this message in a reply
[+] 1 user says Thank You to ortis for this post
29-10-2023, 17:47 PM,
Post: #17
RE: New CANCLIP interface
(27-10-2023, 11:29 AM)ortis Wrote:  Basic Chinese Can Clip only supports Diagnostic Functions. Full Chip Chinese Clone supports Diagnostic functions and Component Programming

Hi ,

If it is a PassThru device - can I test it some how for example with non-Renault car?
Quote this message in a reply
31-10-2023, 20:35 PM,
Post: #18
RE: New CANCLIP interface
Finally I have tested this device on Renautlt Talisman.
And it WORKS!
Quote this message in a reply
31-10-2023, 21:15 PM,
Post: #19
RE: New CANCLIP interface
Hi ,

If it is a PassThru device - can I test it some how for example with non-Renault car?

This is not Pass Thru and only works with Renault and Dacia
Quote this message in a reply
[+] 1 user says Thank You to ortis for this post
01-11-2023, 00:46 AM,
Post: #20
RE: New CANCLIP interface
(31-10-2023, 21:15 PM)ortis Wrote:  Hi ,

If it is a PassThru device - can I test it some how for example with non-Renault car?

This is not Pass Thru and only works with Renault and Dacia

Thank you. It works good with Renault
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Test of Canclip interface without car battery Gigan 10 333 13-02-2024, 14:31 PM
Last Post: Gigan
  CANCLIP interface fix and repair ! titoun 178 99,312 15-10-2023, 10:20 AM
Last Post: Gigan
ORenult Can Clip interface ortis 4 706 23-02-2023, 10:20 AM
Last Post: DWT
  Solved ✔ Renault Canclip 224 RLT2002 ajpds 3 630 22-02-2023, 19:12 PM
Last Post: ajpds
  nissan vi2 interface bluetooth sync code simo2k 4 904 16-05-2022, 21:36 PM
Last Post: simo2k
  CanClip: Automatic Detected has Failed sjdean 4 699 01-11-2019, 12:16 PM
Last Post: sjdean
  CanClip 1.85 does not detect Sensor - RTL2002 sjdean 3 644 28-10-2019, 12:43 PM
Last Post: sjdean
  RENAULT CANCLIP V190 ON MEGA da14u 4 1,583 17-09-2019, 07:38 AM
Last Post: żarówka
ORenult reprogram error with v 185 : Dialogue with the computer is impossible! canclip dm800pvr 0 452 13-05-2019, 12:23 PM
Last Post: dm800pvr
PCitroen renault alliance interface lariusmaximus 7 2,179 04-04-2019, 17:30 PM
Last Post: Stevo

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content