Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
RAM coding problem
16-10-2023, 18:01 PM,
Post: #1
|
|||
|
|||
RAM coding problem
I have a F40, I replaced MGU with a used MGU, but is virginized. I replaced BDC too with a brand new BDC. I programmed it with ISTA and everything worked well.
Now I have problem with a factory fitted RAM, it lost CAFD, it was programmed with ISTA and CPS is always yyyyyyy. I can code it with e-sys, I can read CAFD, but when I read SVT always have CAFD_255.... and when I start car it lose all settings... when I read with ISTA it says not coded... Any idea? |
|||
16-10-2023, 19:12 PM,
Post: #2
|
|||
|
|||
RE: RAM coding problem
Have you used online ista for programming ?
• EGS7/7DCT300 ISN RESET REMOTE •
• KaFAS4 (MID/HIGH) MRR, RAM VIRGIN REMOTE • • NBTevo/ENTRYNAV2/MGU VIRGIN/PATCH • • HDD -> SSD NBT/NBTevo/MGU • CARPLAY NBTevo/EN2/MGU • • FULL FSC PATCH/RETROFIT CIC, EN2,NBT, NBT2, MGU, • • REMOVE CP --> NBTEVO ID4&6/Entrynav2/MGU • UK BASED! |
|||
17-10-2023, 12:35 PM,
Post: #3
|
|||
|
|||
RE: RAM coding problem
|
|||
17-10-2023, 14:02 PM,
Post: #4
|
|||
|
|||
RE: RAM coding problem
Wrong thread.........
Don't ask for FREE FILES
Most tuning fies tested on Dyno by myself Tuning - DPF Off - EGR Off - or any etc Certificated WinOLS Trainer |
|||
17-10-2023, 14:19 PM,
Post: #5
|
|||
|
|||
RE: RAM coding problem
The same problem, just replace ram
|
|||
05-11-2023, 18:28 PM,
Post: #6
|
|||
|
|||
RE: RAM coding problem
No Solution at all?
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content