[Mariushas]

Hello, maybe anyone could help.

I've got touran with changed cluster, original dead and i dont have it. Immo off is made in ECU, but cluster still says immo active and key lamp is blinking. I know that is the way somehow to remove that by editing eeprom. Looking forward for any help. Tried carprog way by putting FF's to some location, but it gives abs lamp on without any fault codes. Dumpo attached, thanks in advance.

touran 24c32.rar
File Type:
Downloaded:	12 times
Size:	1.54 KB

[tpetrov]

I think it's much easier to adapting the dashboard to the car instead of dealing with a bunch of nonsense and in the end something else doesn't work

[viytik]

Sample.No safe immo aktive.

[Mariushas]

Sample.No safe immo aktive.

abs light on after mod, so not good.

[viytik]

ABS Dash code error?

[Mariushas]

ABS Dash code error?

00474 - Control Module for Immobilizer
            004 - No Signal/Communication
everything else working

IMMOEDY

[viytik]

ABS codin good?Or 00000?

[Mariushas]

ABS codin good?Or 00000?

good, tried other posible coding online , but same fault code after mod.

[bboctavian]

Hello make on your eeprom:
Fill with FF FF FF the address range 0x910 to 0x927

and error for immo will be gone

[Mariushas]

Hello make on your eeprom:
Fill with FF FF FF the address range 0x910 to 0x927

and error for immo will be gone

your solution worked after i changed another cluster. thanks again for help.