Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
300CE 24 + Xentry + SDconnect
17-10-2023, 20:39 PM,
Post: #7
|
|||
|
|||
RE: 300CE 24 + Xentry + SDconnect
(17-10-2023, 18:37 PM)gcs190 Wrote: If you want to read the faults from the connector you must use a pulse counter, you can do it with 2 diodes, 2 resistors, a switch and 3 cables., that module did not reach 20 possible errors. Look for the electrical schematic and check the components it had such as the temperature sensor, idle switch, inductive position sensor...it is a very simple system. I have checked the + and the - at the ELZ, that is good, I have also checked the engine speed sensor at the plug that is also good but Im getting no spark or coil control (17-10-2023, 18:47 PM)Joe2 Wrote: SD Connect C4 is working ok ? Yes I connected direct to battery for power as no + in the 16 pin plug (17-10-2023, 20:21 PM)evgenijj Wrote: Such EZL is not-diagnoseable. Thanks for the info |
|||
« Next Oldest | Next Newest »
|
Messages In This Thread |
300CE 24 + Xentry + SDconnect - by Liteace - 17-10-2023, 16:05 PM
RE: 300CE 24 + Xentry + SDconnect - by gcs190 - 17-10-2023, 17:46 PM
RE: 300CE 24 + Xentry + SDconnect - by Liteace - 17-10-2023, 18:23 PM
RE: 300CE 24 + Xentry + SDconnect - by gcs190 - 17-10-2023, 18:37 PM
RE: 300CE 24 + Xentry + SDconnect - by Joe2 - 17-10-2023, 18:47 PM
RE: 300CE 24 + Xentry + SDconnect - by evgenijj - 17-10-2023, 20:21 PM
RE: 300CE 24 + Xentry + SDconnect - by Liteace - 17-10-2023, 20:39 PM
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content