Please make sure you read Rules! and DO NOT upload/post any illegal softwares or Pirated Material , Thank you for understanding :)
  1. ATM - Balkan

    atm balkan file service
  2. MHR TuninG

  3. MOD FILES

  4. TPT TUNING

  5. Soft Platform



FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
09-07-2015, 23:33 PM,
Post: #11
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
"I yust dont understand how to resolder noncorectly soldered pins..you meen relays?"

Yes, example relays. You can see thru microscope these pins.
Becose relay pins need more heat for soldering.
Quote this message in a reply
12-07-2015, 14:26 PM,
Post: #12
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Very good work - thanks smile
Quote this message in a reply
13-07-2015, 00:00 AM,
Post: #13
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi fantomel nice to meet you. How are you

Vai avanti, anche quando tutti si aspettano che lasci perdere.
Go ahead, even when everyone expects you to lose.
Quote this message in a reply
28-12-2015, 03:42 AM,
Post: #14
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Any reason why Prolific PL2303 USB TTL is recommended? I am looking for a quality source of one, that is not a fake. Ones on Amazon are questionable.

Can one with CP2102 be used just as easily? (Less chance for fake, I think)

I see a SiLabs CP2102 one for 7USD, 6 pins, and has RX and TX LEDs.
Quote this message in a reply
28-12-2015, 15:51 PM,
Post: #15
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I had success with pl2303ha chip, the one in the picture with connection, i tested also ftdi232rl and that one works also, slower but works, cp14x or something is crap is not working at all.
I read and wrote mine at 19200 speed, others at 14400, 9600 or 4800, depends on tool quallity i think and driver used smile

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Quote this message in a reply
[+] 3 users say Thank You to fantomel for this post
31-12-2015, 12:21 PM, (This post was last modified: 31-12-2015, 12:22 PM by apolo.)
Post: #16
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo
Quote this message in a reply
02-01-2016, 18:20 PM,
Post: #17
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(31-12-2015, 12:21 PM)apolo Wrote:  Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo

I just bought mine from ebay, item number 290812072080 , looks exactly like fantomel's.

Delivers to Germany, but not sure of speed. To USA, it is much quicker.
Reputation: +1 - apolo [+1]
Quote this message in a reply
[+] 1 user says Thank You to Enabled for this post
11-01-2016, 14:53 PM,
Post: #18
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(02-01-2016, 18:20 PM)Enabled Wrote:  
(31-12-2015, 12:21 PM)apolo Wrote:  Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo

I just bought mine from ebay, item number 290812072080 , looks exactly like fantomel's.

Delivers to Germany, but not sure of speed. To USA, it is much quicker.

I received the Onesanya USB-TTL, and I had to install the old Vista Prolific drivers because the new drivers give the error 10. Probably counterfeit PL2303HX(a) as well, but will work with older drivers. Or maybe because I am on junky Win8.1 64-bit.

I got drivers from here http://www.ifamilysoftware.com/news37.html v3.3.2.102
and http://wp.brodzinski.net/hardware/fake-p...o-install/ v3.3.2.105


Now waiting on header pins to solder.
Quote this message in a reply
18-01-2016, 11:26 AM,
Post: #19
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
It seems now that even my avatar has been cloned biggrin
Look on user apolo biggrin

P.S. My ttl was bought long time ago and is similar with ebay 171202797465 only thing on mine the some of the pins are doubled on 2 rows and all are not curved at 90, also my ttl has 5V on it and not just 3.3V.


Attached Files Thumbnail(s)
       

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +1 - titoun [+1]
Quote this message in a reply
[+] 4 users say Thank You to fantomel for this post
20-01-2016, 19:08 PM,
Post: #20
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
"Cannot communicate with test board" in Philips Flash Utility. doh

Not sure where to start troubleshooting.

Short details:
-Win8 64-bit
-Prolific USB-TTL as described earlier in PC USB port.
-Soldered header pins. connected RX, TX, GND from USB-TTL to galletto.
-Jumpered JP3 pins as in the pictures.
-Galletto connected to computer USB for power.
-Tried 19200, 9600, 4800.
-Correct COM port

Do I need to do anything with pins for 3.3V, LED, or 5V on the Onesanya USB-TTL? Bridge any of them like in vendor picture?

Do I need to do FTDI eeprom fixes and ept first? I thought that was separate.



(edit) Figured it out (see next post)
Quote this message in a reply


Possibly Related Threads...
Thread Author Replies Views Last Post
XZBMW Need 525d original dump file PelsonBMW 2 102 16-05-2019, 08:18 AM
Last Post: PelsonBMW
LFord Need checksum Ford Sid803 dump lupu2007 1 83 12-05-2019, 13:19 PM
Last Post: yudon
  help to program Xprog Atmega64a with UPA 1.3v USB jonazizbey 1 80 03-05-2019, 18:04 PM
Last Post: targa9
2default_avatar FGtech galletto 2 key/code free calculation anoying 20 5,437 02-05-2019, 13:46 PM
Last Post: r0my81
XZBMW BMW 530xd F11 0281019998 - need full ori dump gif_kuba 2 109 01-05-2019, 07:05 AM
Last Post: gif_kuba
  writing dcm6.2 fgtech meccano85 1 112 29-04-2019, 01:59 AM
Last Post: marcobh5
  Dump BDM for 0281012710 Opel Zafira sapopt 1 122 22-04-2019, 07:16 AM
Last Post: Jancss
  Need ord bdm dump from a6 03l906019 AH harry5858 2 89 20-04-2019, 08:17 AM
Last Post: harry5858
1Bosch bosch edc17c69 with galletto v54/ktag Roby 4 166 19-04-2019, 18:59 PM
Last Post: Roby
0Immo Help to work with a dump of Airbag, Key, Immo jonazizbey 0 65 16-04-2019, 14:35 PM
Last Post: jonazizbey

Forum Jump:


Users browsing this thread:
1 Guest(s)

Return to TopReturn to Content