Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
09-07-2015, 23:33 PM,
Post: #11
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
"I yust dont understand how to resolder noncorectly soldered pins..you meen relays?"

Yes, example relays. You can see thru microscope these pins.
Becose relay pins need more heat for soldering.
Quote this message in a reply
12-07-2015, 14:26 PM,
Post: #12
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Very good work - thanks smile
Quote this message in a reply
13-07-2015, 00:00 AM,
Post: #13
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi fantomel nice to meet you. How are you

Vai avanti, anche quando tutti si aspettano che lasci perdere.
Go ahead, even when everyone expects you to lose.
Quote this message in a reply
28-12-2015, 03:42 AM,
Post: #14
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Any reason why Prolific PL2303 USB TTL is recommended? I am looking for a quality source of one, that is not a fake. Ones on Amazon are questionable.

Can one with CP2102 be used just as easily? (Less chance for fake, I think)

I see a SiLabs CP2102 one for 7USD, 6 pins, and has RX and TX LEDs.
Quote this message in a reply
28-12-2015, 15:51 PM,
Post: #15
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I had success with pl2303ha chip, the one in the picture with connection, i tested also ftdi232rl and that one works also, slower but works, cp14x or something is crap is not working at all.
I read and wrote mine at 19200 speed, others at 14400, 9600 or 4800, depends on tool quallity i think and driver used smile

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Quote this message in a reply
[+] 7 users say Thank You to fantomel for this post
31-12-2015, 12:21 PM, (This post was last modified: 31-12-2015, 12:22 PM by apolo.)
Post: #16
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo
Quote this message in a reply
02-01-2016, 18:20 PM,
Post: #17
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(31-12-2015, 12:21 PM)apolo Wrote:  Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo

I just bought mine from ebay, item number 290812072080 , looks exactly like fantomel's.

Delivers to Germany, but not sure of speed. To USA, it is much quicker.
Reputation: +1 - apolo [+1]
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
11-01-2016, 14:53 PM,
Post: #18
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(02-01-2016, 18:20 PM)Enabled Wrote:  
(31-12-2015, 12:21 PM)apolo Wrote:  Hi,
Can i use that in pictures one?or two same anothers?
Because your wtite factory in Singapur not delivery to Germany.

Thanks
B.r
Apolo

I just bought mine from ebay, item number 290812072080 , looks exactly like fantomel's.

Delivers to Germany, but not sure of speed. To USA, it is much quicker.

I received the Onesanya USB-TTL, and I had to install the old Vista Prolific drivers because the new drivers give the error 10. Probably counterfeit PL2303HX(a) as well, but will work with older drivers. Or maybe because I am on junky Win8.1 64-bit.

I got drivers from here http://www.ifamilysoftware.com/news37.html v3.3.2.102
and http://wp.brodzinski.net/hardware/fake-p...o-install/ v3.3.2.105


Now waiting on header pins to solder.
Quote this message in a reply
18-01-2016, 11:26 AM,
Post: #19
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
It seems now that even my avatar has been cloned biggrin
Look on user apolo biggrin

P.S. My ttl was bought long time ago and is similar with ebay 171202797465 only thing on mine the some of the pins are doubled on 2 rows and all are not curved at 90, also my ttl has 5V on it and not just 3.3V.


Attached Files Thumbnail(s)
       

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +1 - titoun [+1]
Quote this message in a reply
[+] 9 users say Thank You to fantomel for this post
20-01-2016, 19:08 PM,
Post: #20
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
"Cannot communicate with test board" in Philips Flash Utility. doh

Not sure where to start troubleshooting.

Short details:
-Win8 64-bit
-Prolific USB-TTL as described earlier in PC USB port.
-Soldered header pins. connected RX, TX, GND from USB-TTL to galletto.
-Jumpered JP3 pins as in the pictures.
-Galletto connected to computer USB for power.
-Tried 19200, 9600, 4800.
-Correct COM port

Do I need to do anything with pins for 3.3V, LED, or 5V on the Onesanya USB-TTL? Bridge any of them like in vendor picture?

Do I need to do FTDI eeprom fixes and ept first? I thought that was separate.



(edit) Figured it out (see next post)
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Megan 2 2.0 EDC 16cp33 eprom dump need galisdoo 1 49 Yesterday, 08:18 AM
Last Post: galisdoo
ZVW EDC17cp14 please inspect this dump pepi 2 95 06-03-2024, 07:54 AM
Last Post: pepi
  me 7.5 dump request murkutis 1 90 21-02-2024, 13:07 PM
Last Post: murkutis
  Solved ✔ I need ori dump ecu psa 0281011802 McMihai 2 117 29-12-2023, 21:24 PM
Last Post: McMihai
ZVW VW Jetta PCR2.1 03L906023RH 0248 ori dump Sirius83 1 132 27-12-2023, 22:17 PM
Last Post: Tscheppo
ZTAudi Solved ✔ 036906034CA dump needed szilagyilajos 4 264 10-12-2023, 01:15 AM
Last Post: szilagyilajos
XZBMW BMW F31 - EDC17C76 - 8588425 Dump Needed Semi14 1 270 18-11-2023, 12:02 PM
Last Post: Semi14
  SEARCHING : BMW EDC16C35 ORI DUMP SW 1037500775 KESS-OBD READ obdcloud 3 294 15-11-2023, 12:24 PM
Last Post: bboctavian
  DUMP REQUIRED PLEASE MSV80 Jordiano 0 136 10-11-2023, 08:31 AM
Last Post: Jordiano
  ZGW Dump Mercedes W211 mechanior2686 0 160 08-11-2023, 21:03 PM
Last Post: mechanior2686

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content