Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
20-01-2016, 20:18 PM,
Post: #21
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I played more with the device and I have successfully flashed the NXP chip with Flash Magic 9.20 from this post. http://cartechnology.co.uk/showthread.ph...7#pid82077

I was scared to try with Flash Magic because it doesn't have a way to identify or read.
I used the same settings as I would use with the Philips Flash Utility: Full erase, verification, etc.

I applied the eeprom and ept from this thread's pack, and all is working well!


   


A big thanks to fantomel nod




Still no luck with the Philips flash utility. Oh well.
Quote this message in a reply
[+] 5 users say Thank You to Enabled for this post
28-01-2016, 14:49 PM,
Post: #22
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Does Galletto support to remap honda GD8 and GD3?
Thanks in advanced

yes I love you All handshake
thumbsup thumbsup thumbsup
Quote this message in a reply
[+] 1 user says Thank You to meiguang for this post
30-01-2016, 13:17 PM,
Post: #23
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hello guys program 0386 function for no rework pcb?
Quote this message in a reply
10-03-2016, 16:00 PM,
Post: #24
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I upgraded from 0386 to 0475. flash ok
I used mprog and fwrite. 0475 installed no time back.
The program starts, but all the buttons are gray.
nothing is active. I deleted and installed the drivers.

I repeated the FW flash, 5 times. anything.
can you help me? CRP is disabled.

help me please
Quote this message in a reply
07-04-2016, 08:44 AM,
Post: #25
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
This package contain a activation ?
my tool is blocked for data lost at 2012..
Quote this message in a reply
07-04-2016, 13:40 PM,
Post: #26
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(28-06-2015, 11:28 AM)fantomel Wrote:  FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386

What you can find here:

1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.

2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.

3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.

Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
[Image: 11h73sz.jpg]

Password: fantomelfree4galletto
Enjoy.

hello I want to put the FGTECH 0475 version but you can write with the programmer J-link? thanks
Quote this message in a reply
15-05-2016, 13:49 PM,
Post: #27
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I have low voltage problem how to solve this problem ?
Quote this message in a reply
21-05-2016, 17:14 PM,
Post: #28
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hi,

the guys who did the upgrade, can you tell us the real advantages and/or differences after and before upgrade?

Thanks
Quote this message in a reply
22-05-2016, 00:20 AM, (This post was last modified: 18-04-2017, 15:44 PM by Clusters.)
Post: #29
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
(21-05-2016, 17:14 PM)mauroxj Wrote:  Hi,

the guys who did the upgrade, can you tell us the real advantages and/or differences after and before upgrade?

Thanks

The 0386 version of the program has a modification that forces a rollback on your PC's clock in order to work properly. Quite annoying.

The 0475 doesn't seem to be perfect either, as I have to run the program twice for it to work. Run it once and the program doesn't have the buttons available (gray buttons). I exit and run the program again and then it all works properly. Maybe it's because I haven't yet reworked mine, who knows.
Quote this message in a reply
[+] 2 users say Thank You to Enabled for this post
22-05-2016, 18:52 PM,
Post: #30
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Can i read and write with upa or xprog ???
Quote this message in a reply


Possibly Related Threads…
Thread Author Replies Views Last Post
  Megan 2 2.0 EDC 16cp33 eprom dump need galisdoo 1 49 10 hours ago
Last Post: galisdoo
ZVW EDC17cp14 please inspect this dump pepi 2 95 06-03-2024, 07:54 AM
Last Post: pepi
  me 7.5 dump request murkutis 1 85 21-02-2024, 13:07 PM
Last Post: murkutis
  Solved ✔ I need ori dump ecu psa 0281011802 McMihai 2 117 29-12-2023, 21:24 PM
Last Post: McMihai
ZVW VW Jetta PCR2.1 03L906023RH 0248 ori dump Sirius83 1 131 27-12-2023, 22:17 PM
Last Post: Tscheppo
ZTAudi Solved ✔ 036906034CA dump needed szilagyilajos 4 261 10-12-2023, 01:15 AM
Last Post: szilagyilajos
XZBMW BMW F31 - EDC17C76 - 8588425 Dump Needed Semi14 1 270 18-11-2023, 12:02 PM
Last Post: Semi14
  SEARCHING : BMW EDC16C35 ORI DUMP SW 1037500775 KESS-OBD READ obdcloud 3 294 15-11-2023, 12:24 PM
Last Post: bboctavian
  DUMP REQUIRED PLEASE MSV80 Jordiano 0 136 10-11-2023, 08:31 AM
Last Post: Jordiano
  ZGW Dump Mercedes W211 mechanior2686 0 160 08-11-2023, 21:03 PM
Last Post: mechanior2686

Forum Jump:


Users browsing this thread:
2 Guest(s)

Return to TopReturn to Content