Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]

FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
28-06-2015, 11:28 AM,
Post: #1
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386

What you can find here:

1.For tool number 0386: ept file,fix file,hex dump and 2 versions of programs V54 used for it, the one from china and the AES November software.

2.For tool number 0475: ept file,fix file, hex dumps made from my tool and program V54 for it that does not need time back.

3.For both tools you have here how to connect to it, how to read firmware movie, how to write dump that you wish.

Reading and writing the mcu for this tool can be done with old Philips LPC 2000 software and USB-TTL adapter, preferd the one that uses PL2303 chipset. You need also a jumper in position to do that.
If you want to check CRP level of your NXP LPC2119 mcu you can do that with FlashMagic and USB-TTL adapter.
[Image: 11h73sz.jpg]

Password: fantomelfree4galletto
Enjoy.


Attached Files
GALLETTO COMPLETE FANTOMEL.txt
File Type: .txt
Downloaded: 2,838 times
Size: 248 bytes


If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Reputation: +91 - pavkvl [+1] , darek_naprawa [+1] , newtronic [+1] , sofix [+1] , rachid36 [+1] , milanoffracing [+1] , Ursu [+1] , 16eddi67 [+1] , McMihai [+1] , sweetsam [+1] , volavka [+2] , Electronics [+1] , autobleu [+1] , starshy [+1] , maxtorrld [+1] , auto_tech [+1] , titoun [+1] , yur65 [+1] , pasquale78 [+1] , alexbcn [+1] , bmw_mads [+1] , mdanilo [+1] , gabivw [+1] , 0176.abraham [+1] , baldwin42 [+1] , WhiteAndBlue [+1] , Mind-Twist [+1] , banoo [+1] , satmanek [+1] , apolo [+1] , bibkare [+1] , metronet [+1] , zoranmadzar [+1] , alexandr1966 [+1] , nedved59 [+1] , jhonny [+1] , ixot [+1] , carsoftobd [+1] , makura [+1] , Tand [+1] , Smog [+1] , dvdpgn [+1] , rnkuca [+1] , AlexUA [+1] , rch11 [+1] , bounce24 [+1] , Semtex [+1] , lxddci [+1] , florinelxxl [+1] , maiquelx [+1] , virtualman93 [+1] , giiintas [+1] , JarsaR [+1] , ocostel [+1] , prokon [+1] , hamzettin [+1] , autko [+1] , ROD-BENDERS [+1] , doslamer [+1] , loki954 [+1] , ToMiBoY [+1] , winter [+1] , Joblack [+1] , obdflasher [+1] , fluorescent [+1] , _estima_ [+1] , k4t4pl4sm [+1] , Le-Mans [+1] , dj_jormi [+1] , gleisongg86 [+1] , jacques23 [+1] , susov8 [+1] , Gabriel130592 [+1] , ozon79 [+1] , miloudmess [+1] , chuby [+1] , antilag [+1] , autodash [+1] , toutancamon [+1] , meiguang [+1] , guliver [+1] , talleresmalaga.es [+1] , Tech206 [+1] , k_algulam [+1] , Baki [+1] , didi70 [+1] , mikajna [+1] , BS68 [+1] , dabaca [+1] , JaVlk [+1]
Quote this message in a reply
[+] 404 users say Thank You to fantomel for this post
02-07-2015, 00:36 AM,
Post: #2
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Hello,

Can I use it with v53 ?

thank you
Quote this message in a reply
[+] 2 users say Thank You to ToNy68 for this post
02-07-2015, 17:51 PM,
Post: #3
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Only v54 with the above serials
Quote this message in a reply
[+] 1 user says Thank You to blacklisted for this post
03-07-2015, 22:56 PM,
Post: #4
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
What is the diferents betwen china and AES for 0386 number ? are this better softs and dumps than ori-ones which came with v54 china?
Quote this message in a reply
04-07-2015, 07:44 AM,
Post: #5
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Aes and china uses same key for v54 witch in fact is older version of soft and bootlloader then 0475.

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Quote this message in a reply
[+] 5 users say Thank You to fantomel for this post
05-07-2015, 22:53 PM,
Post: #6
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Are there any eprovment if reflash..my v54 cant read a lot of ecu on can-bus and bdm
Quote this message in a reply
08-07-2015, 21:22 PM,
Post: #7
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
The question is how is your reworked board? Is it or is it not? is it proper or not ....... it does not matter only fw+soft you know ....

If you like my post and it helped you please press [Image: postbit_reputation.gif][Image: tyl_add.png]
Quote this message in a reply
[+] 4 users say Thank You to fantomel for this post
09-07-2015, 02:27 AM,
Post: #8
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
I didnt rework anything yet..I have problems with can-line and bdm mpc55xx 56xx..k-line works..can you tel me which part need to be replaced to make this work?thanks..
Quote this message in a reply
09-07-2015, 22:54 PM,
Post: #9
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
For BDM change 74HC14, and resolder noncorrectly soldered pins on pcb (relays)
CAN issue can be 82C250
Quote this message in a reply
[+] 10 users say Thank You to toms4 for this post
09-07-2015, 23:07 PM, (This post was last modified: 19-09-2017, 20:33 PM by rs@chip.)
Post: #10
RE: FGTECH GALLETTO V54 FIX EPT HEX DUMP & PROGRAM FOR 0475 AND 0386
Thank you for that info ..noncorectly soldered pins..you meen relays?
Quote this message in a reply
[+] 1 user says Thank You to rs@chip for this post


Possibly Related Threads…
Thread Author Replies Views Last Post
  Megan 2 2.0 EDC 16cp33 eprom dump need galisdoo 1 49 Today, 08:18 AM
Last Post: galisdoo
ZVW EDC17cp14 please inspect this dump pepi 2 95 06-03-2024, 07:54 AM
Last Post: pepi
  me 7.5 dump request murkutis 1 86 21-02-2024, 13:07 PM
Last Post: murkutis
  Solved ✔ I need ori dump ecu psa 0281011802 McMihai 2 117 29-12-2023, 21:24 PM
Last Post: McMihai
ZVW VW Jetta PCR2.1 03L906023RH 0248 ori dump Sirius83 1 131 27-12-2023, 22:17 PM
Last Post: Tscheppo
ZTAudi Solved ✔ 036906034CA dump needed szilagyilajos 4 261 10-12-2023, 01:15 AM
Last Post: szilagyilajos
XZBMW BMW F31 - EDC17C76 - 8588425 Dump Needed Semi14 1 270 18-11-2023, 12:02 PM
Last Post: Semi14
  SEARCHING : BMW EDC16C35 ORI DUMP SW 1037500775 KESS-OBD READ obdcloud 3 294 15-11-2023, 12:24 PM
Last Post: bboctavian
  DUMP REQUIRED PLEASE MSV80 Jordiano 0 136 10-11-2023, 08:31 AM
Last Post: Jordiano
  ZGW Dump Mercedes W211 mechanior2686 0 160 08-11-2023, 21:03 PM
Last Post: mechanior2686

Forum Jump:


Users browsing this thread:
3 Guest(s)

Return to TopReturn to Content