[MasterMulder]

Hi,

I've got a gid from a corsa and a CD30 MP3 from a different corsa. I've got the CAR PASS CODE of the gid but I need to program the Radio with the gid, here is the RADIO DUMP (attached).

Can anyone help me by modifing the dump to marry it with the GID? Is it necessary the GID Dump too?

thanks in advance, best regards

[Shooting]

Hi,

I've got a gid from a corsa and a CD30 MP3 from a different corsa. I've got the CAR PASS CODE of the gid but I need to program the Radio with the gid, here is the RADIO DUMP (attached).

Can anyone help me by modifing the dump to marry it with the GID? Is it necessary the GID Dump too?

thanks in advance, best regards

Here set to Virgin, pair using PIN from Display


wbr

[mattydr67]

Just in case you need the pin: 5565
(from your CD30 dump otherwise use the dump from Mr. Shooting)

Good luck

[MasterMulder]

Thanks to all,

my opcom cannot program the CD30 MP3, it says ECU Initializing.

Is it possible to program it having the GID code that is: 8126

or is necessary the GID DUMP to pair them?

thanks in advance

[mattydr67]

Yes, to marriage the CD30 using the virgin dump from Mr Shooting, use the Display ( GID ) pin code

Good luck

[MasterMulder]

1698247699[/url]']
Yes, to marriage the CD30 using the virgin dump from Mr Shooting, use the Display ( GID ) pin code

Good luck

I tried but opcom cannot acces cd30 programming, so i was thinking if there was a way to put the pin directly in the dump instead of programming it with OPCOM.

[mattydr67]

Did you flashed the virgin dump first to CD30, do you?
Also check in Radio and Display Messuring block if there one of item or both are in Security Waiting Time.
Each time you try to use a wrong code will activate this and you have to wait.

Good luck

[MasterMulder]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

[mattydr67]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.

Good luck

[MasterMulder]

Non

1698251117[/url]']
Did you flashed the virgin dump first to CD30, do you?

Good luck

Yes, flashed it on cd30 e verified it was virginized. But the problem is my opcom, I already had this problem. So i was curious if the marriage could have been done directly from the dump, putting the GID Pin in the cd30 dump (?)

Check if the security waiting time is activate.

Good luck

No i do not think, i'm sure it is the opcom problem, cause sometimes it works and sometimes (always pratycally)... i'll try with another opcom or with a TECH2, when I click on EHU it enter but says errore ECU initializing then errore and restart, only consent to read fault codes but not programming. Thanks for your help.