Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Supra headlights help
29-10-2023, 13:50 PM,
Post: #1
|
|||
|
|||
Supra headlights help
Hi guys, we have this supra crashed and bought in auction
WZ1DB0C06MW035038 actual ordered headlight has part number 9481755-04. When VO coded there are many faults about resistors.. and when calculation flash, hwel seems not good and is not black. are these part numbers ok and its coding problem? IF need to order different headlights can you point to correct part number? Thanks |
|||
30-10-2023, 09:08 AM,
Post: #2
|
|||
|
|||
RE: Supra headlights help
Have you tried using ISTA or tool32 to set the classification resisitors?
What HWEL are shown? |
|||
30-10-2023, 12:47 PM,
Post: #3
|
|||
|
|||
RE: Supra headlights help
i dont have car right now to see HWEL.
i tried with ista 4.37.20 which has toyota integrated but no option was there for classification. Another thing is that in VO, i dont see any option for lights, like 552 or 5A2, so LED should be factory standard. |
|||
30-10-2023, 22:19 PM,
Post: #4
|
|||
|
|||
RE: Supra headlights help
|
|||
31-10-2023, 07:39 AM,
Post: #5
|
|||
|
|||
RE: Supra headlights help
The current module is for S18A. Not S18T. Can you share the fa and svt.
|
|||
31-10-2023, 13:24 PM,
Post: #6
|
|||
|
|||
RE: Supra headlights help
If you get resistor error in ISTA, you have to write QR code on headlight to it, or adapt from working side to replaced side. there is service function for it.
|
|||
31-10-2023, 17:59 PM,
Post: #7
|
|||
|
|||
RE: Supra headlights help
(31-10-2023, 13:24 PM)RaoulK1998 Wrote: If you get resistor error in ISTA, you have to write QR code on headlight to it, or adapt from working side to replaced side. there is service function for it. yes but should use toyota ista for that? The function is missing in ista standalone compiled by Sedoy |
|||
31-10-2023, 19:30 PM,
Post: #8
|
|||
|
|||
RE: Supra headlights help
Tool32 should work.
|
|||
31-10-2023, 19:33 PM,
Post: #9
|
|||
|
|||
RE: Supra headlights help
(31-10-2023, 19:30 PM)TheNine90 Wrote: Tool32 should work. can you help with the commands for tool32? |
|||
31-10-2023, 22:21 PM,
Post: #10
|
|||
|
|||
RE: Supra headlights help
(31-10-2023, 13:24 PM)RaoulK1998 Wrote: If you get resistor error in ISTA, you have to write QR code on headlight to it, or adapt from working side to replaced side. there is service function for it. i just checked with toyota ista 4.40 and there is no abl for matrix code. only fub document. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content