[budddyyy]

Hello guys in bmw e serie only two Position can have keyless go key.
When one key is lost for example key nr2 and when make a new keyless go key with vvdi what are the correct steps to make new keyless go Lex working because 2 slots are allready used.

I don’t find Solution to delete the lost keyless go key and add the new one to this Position.

Is it enough to disable the lost keyless go key and after that das new key to this position? Because i can only disable a key but don’t know how to delete the key

Maybe someone have a good idea what are the correct steps.

Sorry for my Bad english 

Have a nice Weekend all

[oceandiver86]

You only need to disable the key in slot 2 with any tool as for example ISTA.
Thats enough to make the keyless function work for an additional key that is programmed to slot 3 as example.

[budddyyy]

Ahhh nice . Thanks for that info .
So i can use a new keyless key to other Position when the old keyless key is disabled . If this works then it is a good Solution

[johann74270]

hi it seems to me that you can code CAS so that it accepts 4 keys from 1 to 4

[budddyyy]

From where you have this Info ? Why you think so ?

[gfriedrichi]

From where you have this Info ? Why you think so ?

Maybe from here
Not sure if it really works, never tried key 3 or 4
I always delete missed key using mini acdp, then add new key to position 1 or 2

[budddyyy]

Interesting maybe can be Code that 4 keys works with ca.

Ok acdp can delete key i don’t know if vvdi can also delete key i See only enable or disable a key