[redog4dy]

Hello, 

i have below problem: tried to change ambiental lights colours, didnt worked on bdc3.. almost all colours were not correct, and the little part on the wheel was black(didnt turned on) . 
so i vo coded bdc, initial ambiental lights with ista , lights are working but i got this error.. 
BDC: driver's door switch block(LIN): wrong variant installed 

Is this a coincidence? Because as i know this error didnt appear before. 

Any idea how to get rid of it ? 

Regards,

[litany]

Simple, reset BDC

[redog4dy]

how to suggest reset BDC ?
vo code it, i initalized also ambiental, all works, but still got this problem i mention with driver's block.
also reboot it with esys.

[kimz]

Resetting BDC won't help here, if you have such an error there are two options:
- someone previously installed the wrong version of the control block,
- you messed up something in the vehicle's FA

Now all you have to do is replace the switch with the correct one or use FDL to change the variant to the one installed or disable its checking. Look for an entry like variante_xxx, I don't have Esys at hand right now so I won't tell you which one

[redog4dy]

Nothing is wrong in fa, we retrofitted two weeks ago from led to laser. So fa is changed only the headlights.
Update after he checked, only on the colour of initialize is working led from left sheel. The little led on board.
In another colour is not working. So maybe has something to do with lights changing?
But now he s vo coded , like default, factory. Bdc should be initialized on all colours on navi now ?

[redog4dy]

is there any possibility to reflash bdc even if its on latest ilevel?
Maybe flashing again btld/swfl/cddeploy will fix my issue?

Thanks,