[Mauker33]

Hello all, can someone explain how to use the FULL SDP with the launcher console? I have, for years now, just used the deltas from Shawn with the launcher console incrementally keeping ista up to date. Have even had previous full sdp's in the download folder and launcher console has never used them, always used the delta's.. 

Well, my ista just started some goofy stuff so I have uninstalled and reinstalled with 4.41.4x standalone from Sedoy... 

Since the 4.44.10 is all full info (BLP, SDP, Global and Languages), does this mean I can jump straight to using the 4.44.10 in the download folder for launcher console? If so, what about all the META files? 

Or, do I have to incrementally do all the DELTA updates still to get current again? 

Thanks in advance

[rocdeng]

No need to use the DELTA files, full SDP and other 4.41.4x SQLiteDBs istapackage are enough.
Just put the files and BMW_ISPI_ISTA-META_4.44.14.xml, SBMW_ISPI_ISTA-META_SDP_4.44.11.xml and run the console app(latest version), if something wrong, then post here and check again(normally is the registry error).

[Mauker33]

Well DAMN!!!!! I used the META from current version, the META from the 4.41.1x, and all the full install files using launcher 1.2.4.11 from Node.... and it took off!!! Even added in the DELTAS for 4.44.2x and doing them all at once!!

Good lord that saves a lot of time doing the 11 updates to get current!!!

THANK YOU!!!!!

[Twointje]

Well DAMN!!!!! I used the META from current version, the META from the 4.41.1x, and all the full install files using launcher 1.2.4.11 from Node.... and it took off!!! Even added in the DELTAS for 4.44.2x and doing them all at once!!

Good lord that saves a lot of time doing the 11 updates to get current!!!

THANK YOU!!!!!

Can you explaine what do do and what files i need to download ,i just did the update with the new ISPI launcher and the launcher said the update went wel but the SDP is still the 4.44.11.
I never used the launcher console before..

   

[Mauker33]

Well DAMN!!!!! I used the META from current version, the META from the 4.41.1x, and all the full install files using launcher 1.2.4.11 from Node.... and it took off!!! Even added in the DELTAS for 4.44.2x and doing them all at once!!

Good lord that saves a lot of time doing the 11 updates to get current!!!

THANK YOU!!!!!

Can you explaine what do do and what files i need to download ,i just did the update with the new ISPI launcher and the launcher said the update went wel but the SDP is still the 4.44.11.
I never used the launcher console before..

If you are using the ISPI Launcher, I would stick with that, but, My gut is telling me that you did not have all the files for SDP in the shared storage folder... you need the 4.44.11 META SDP,  the 4.44.20 DELTA SDP, and the 4.44.20 META SDP... all the files you need are here...

https://cartechnology.co.uk/showthread.p...tall+files

[Twointje]

If I did not had all the nessecairy files the ISPI launcher would tell me that these files where missing.
I am not the only one who has problems with updating to 4.44.20 with the ISPI launcher. Lots of people on this forum are saying that they have the same problems. The ISPI launcher says the update was complete without any errors and all the files are updated to 4.44.20 only the SDP is not updated and is still the 4.44.11.
After restarting the ISPI launcher I get the message that there are no new updates.
All the files are in the sharefolder the 4.44.11 META SDP, the 4.44.20 DELTA SDP, and the 4.44.20 META .. And nobody here on this forum now’s where the problem is.

[Siki78]

If I did not had all the nessecairy files the ISPI launcher would tell me that these files where missing.
I am not the only one who has problems with updating to 4.44.20 with the ISPI launcher. Lots of people on this forum are saying that they have the same problems. The ISPI launcher says the update was complete without any errors and all the files are updated to 4.44.20 only the SDP is not updated and is still the 4.44.11.
After restarting the ISPI launcher I get the message that there are no new updates.
All the files are in the sharefolder the 4.44.11 META SDP, the 4.44.20 DELTA SDP, and the 4.44.20 META .. Do nobody here on this forum now’s where the problem is.

Give me teamviewer on pm I will start update for you

[Twointje]

1699307321[/url]']

1699301835[/url]']
If I did not had all the nessecairy files the ISPI launcher would tell me that these files where missing.
I am not the only one who has  problems with updating to 4.44.20 with the ISPI  launcher. Lots of people on this forum are  saying that they have the same problems. The ISPI launcher says the update was complete without any errors and all the files are updated to 4.44.20 only the SDP is not updated and is still the 4.44.11.
After restarting the ISPI launcher I get the message that there are no new updates.
All the files are in the sharefolder the 4.44.11 META SDP,  the 4.44.20 DELTA SDP, and the 4.44.20 META .. Do nobody here on this forum now’s where the problem is.

Give me teamviewer on pm I will start update for you

Did you found a solution how to make the ISPI Launcher see the SDP 4.44.20 ? 
I don’t wantrouw update using the launcher console like some others do. 
I don’t want problems with future ista I ok dates with the USPI launcher. 
I contacted AmazingSpiderman and he knows about the problem and is working on a solution, he was updating at this moment if the update works he would share it on this forum.

[Siki78]

I have ISTA Ilean and update with ista launcher console without problem. Have same faulty like other and you sdp was not updated

[Twointje]

Update. my ista version 4.44.20 is now fully updated ,also the SDP is now at version 4.44.20 , i used the original ISPI launcher after contacting the reseller and he fixed the problem.