[manutec]

Hello, I have a problem with siemens ppd1.2 to Fap off. I have tried several files but in all of them the fap light comes on in the dashboard after a few km. I have previously reset fap with diagnosis. Can anyone help with a file that works? ecu 03G906018FB [attachment=176864]

03G906018FB(2).rar
File Type:
Downloaded:	8 times
Size:	52.39 KB

[BENMADI]

Put ori, perform short dpf regen, clear the code, no need to reset something
Put dpf off file,
dpf light will be on and particle load coefficient 500%
drive about 40 km and the value decrease to 0 and dpf light goes off. If you removed the plug from the dpf pressure sensor in short time particle load coefficient reaches 100% and dpf light goes on.
So, left sensor plugged, measured values were between 0 and 15 mbar and all will be ok

[manutec]

Put ori, perform short dpf regen, clear the code, no need to reset something
Put dpf off file,
dpf light will be on and particle load coefficient 500%
drive about 40 km and the value decrease to 0 and dpf light goes off. If you removed the plug from the dpf pressure sensor in short time particle load coefficient reaches 100% and dpf light goes on.
So,  left sensor plugged, measured values were between 0 and 15 mbar and all will be ok

Hi, I have already followed those steps. I think the problem is dpf off file. Can someone help with a verified file ok?

[Leaking]

No need to reset or do regen on ori file for good Siemens ppd dpf off after few km dpf lamp will go off forever

[Jurebv]

WinOLS (VW Golf (dpf egr) - SN100L8000000).rar
File Type:
Downloaded:	16 times
Size:	49.08 KB