Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
22 VW Jetta SE LKA malfunction need to calibrate 063B
16-12-2023, 06:53 AM,
Post: #1
|
|||
|
|||
22 VW Jetta SE LKA malfunction need to calibrate 063B
I did the ADAS calibrations on this car vin 3VW7M7BU2NM0156659 that was brought to me with the Front Assist off needing front radar calibration. After scanning the car and performing the calibrations needed. Once I finished the calibrations, the Lane Keep Assist off message was still present. Turned out I was getting a DTC code C10ACF2 Steering Interface for lane departure warning system not coded. I'm lost on this issue because it's the last DTC I need to clear and this Jetta is only a 2WD. From what I've read in the numerous VW forums, the ADAS brain is at fault most of the time. Any help would be greatly appreciated!!
Ronneill M
Head janitor in charge!!!! *** I like take things apart and put them back together with improvements so they have a lesser chance of failing, at least that's what I hope for *** Carsyde Automotive Solutions - Solutions for all your car needs! Las Vegas aka Lost Wages NV USA |
|||
18-12-2023, 22:58 PM,
Post: #2
|
|||
|
|||
RE: 22 VW Jetta SE LKA malfunction need to calibrate 063B
Hi there, check and post coding of ECU address A5, especially what bits are set for byte 09.
And check coding of steering assist (address 44), if lane assist is coded anyway. If I've helped don't forget to press the magic buttons: +
|
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content