[DavidT]

we have audi q 7  2010 my edc17cp07 at the garage for dpf off
car has already egr and tuend pwr file
i remove dpf frome native file and after write car start but shut off engine in a second
i tried many method..update file , obd also bench mode tahe same result
checksum manual etc
 with mode file car stop in second and P0607 DTC control unit performance
with native file car dont start only with the last update start but when mod fiel the same results
if happened someone such of problem....

[al70]

Do you have original file ?

[DavidT]

Do you have original file ?

yes for sure

[lsalt100]

did U try to disconnect Temp and DiffPress sensors(on dpf) after dpf off moded file was uploaded?

@with native file car dont start only with the last update start but when mod fiel the same results
can U explain "the last update"?

[DavidT]

did U try to disconnect Temp and DiffPress sensors(on dpf) after dpf off moded file was uploaded?

@with native file car dont start only with the last update start but when mod fiel the same results
can U explain "the last update"?

UPDATE LAST SW VERSION
car doesnt start anyway ,,neither remaped power nor dpf ..start only with ori file

[lsalt100]

car doesnt start anyway ,,neither remaped power nor dpf ..start only with ori file

this one? vag_bosch_edc17cp04_obd_maps_wauzzz4l8ad025628_20231127192347.rar obd writed?

[al70]

its bad mod, post ori file and someone will do allmods on ori file,this an happen sometimes when you modify an ecu thats been modded beforeb best to do all mods at the same time on original

[DavidT]

its bad mod, post ori file and someone will do allmods on ori file,this an happen sometimes when you modify an ecu thats been modded beforeb best to do all mods at the same time on original

file that i upload here its original file/vr file..no mode on it

[pvkosherov]

try this file, this is whitout stage. just dpf and egr off

[CenturionM]

we have audi q 7  2010 my edc17cp07 at the garage for dpf off
car has already egr and tuend pwr file
i remove dpf frome native file and after write car start but shut off engine in a second
i tried many method..update file , obd also bench mode tahe same result
checksum manual etc
 with mode file car stop in second and P0607 DTC control unit performance
with native file car dont start only with the last update start but when mod fiel the same results
if happened someone such of problem....

you ecu

---------------------------------------------------------------------------

ECU type: Bosch EDC17CP04 [VAG]
Bosch SW number(s): 1037 518178
VAG Part number: 4L1 910 401 D SW ver: 0080
Hardware Part number: 4L0 907 401 A
Engine code: CASA
System description: 3.0TDI EDC17

---------------------------------------------------------------------------

you mod

test and report

required rep +1 and thanx

password priv