[spooky75]

Hello,

Just noticed today that autobrake/maneuver brake function does not work both on front and rear.
Doublechecked codings on ABS and PLA module and everything seems OK from that side.
Any idea ?

ABS Module
5Q0614517FK
Byte 24 Bit 5 activated
Byte 27 Bit 1 activated


PLA3 Module
3Q0919298B, tested to upgrade to 3Q0919298E no changes
MAS12843-Maneuvering brake function, Parking aid active ,1

[Versus]

PLA module need correct dataset. No need any coding.

[spooky75]

PLA module need correct dataset. No need any coding.

I have tested with dataset from VCP and ODIS (from mibsolution) and result is same.
Auto brake icon on 5F screen indicate at autobrake function is active, but does not brake.
Other PLA functions like Park assist works normally.

[Versus]

Autobrake work when 2 or more PDC sensors detect obstacles

[spooky75]

Hmm.. Thank you. I will try test with cardboard box and see if will work.
5QA on Golf 7 works flawlessly with autobrake.

[spacewalker]

any warning message on cluster about auto brake / press brake ?

[spooky75]

any warning message on cluster about auto brake / press brake ?

Nothing, just act as PLA without autobrake.
All functions working normally except autobrake.
Trying to source latest version of SW: 3Q0919298F and see if will be better.

[Versus]

Wrong dataset. 3Q0919298B support rear braking 2 buzzer, 3Q0919298C support rear and front braking. 3Q0919298E support rear and front braking 1 buzzer.

[spooky75]

Car originally came with 3Q0919298B, tested with 3Q0919298C and 3Q0919298E with correct datasets for each version.
In all cases everything worked as should except autobrake.
Didn't notice any problems with buzzers on all versions.

[Versus]

You car have 2 buzzer. Front for front PDC, and rear for read PDC. New version have only only front buzzer. Autobrake working without problem.