[NTec]

Hello to all.

I´m trying to modify this ecu file from an Opel Insignia OPC. 2016
2.8 V6 239Kw
Ecu Bosch. 0 261 209 631

This car has three driving modes.
I just want to make an Stage 1 in sport mode.

Thank you to all in advice.

insignia ori.zip
File Type:
Downloaded:	5 times
Size:	49.8 KB

[Adelin731]

when you tune your ecu file is tuned for all driving modes, there is no such thing as stage 1 only for sport mode, if this would be the case i would have on my car standard in eco mode, stage 1 in comfort mode, stage 2 in sport mode and stage 3 in sport +

[NTec]

Are you sure about that?
in some ecus is possible to modify ecu maps separately when ecu has more than one map.
anyone can confirm this?

[Mis]

I can tune it with nearly stock power/torque without OPC mode and stg1 with OPC, already made it in the Insignia OPC/Insignia 2.8t 250hp and Vectra C OPC.

[KicOPC]

Drive mode buttons only change the pedal map AFAIK.
Map your stage 1 on OPC mode and lower requested torque in normal and sport the tables by a couple percent respectively.

[NTec]

So, is not possible to tune just one map?