[MORKAS]

Greetings colleagues, I am writing this post to ask you about the installation of the VAS5054A.
You see, with my head, I have no installation problems, Windows 10, after installing the Odis Service (and creating the Softing folder itself), when connecting via USB the head recognizes it and appears as "vehicle softing", within administrator of devices. That's correct, but...
Now I am trying to install a friend's head, which when I opened it I saw that it is the one with the blue plate, and I have no way for Windows to recognize it, it always tells me "usb is not recognized", and in administrator of devices, it stays within the USB list with the typical little yellow triangle and I think error 43.
Is there a way to get an executable file that installs its drivers? Thanks.

[vagvag]

Hi...............
Well, from the moment that you have continuously the 'USB device not recognized' message and also on the device manager the classic yellow explanation mark then either the clone head itself is defective or the USB cable.........
If you tried and you used other and 100% working USB cable and results are same, then the head is defective.............

FYI, does not takes role if you have installed or not the Vas5054 driver, if the head and USB cable was not defective you should not had never the 'USB device not recognized' message and on device manager you was had the VAS5054A to shows ok the name just without the missing driver.............
Regarts........