Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Ford Convers instrument cluster random resetting
30-12-2023, 19:16 PM,
Post: #1
|
|||
|
|||
Ford Convers instrument cluster random resetting
Hello, has anyone encountered the problem of cyclical reset of Converse?, I see that the problem is quite common but there is no answer. Maybe someone can help with this problem.
Thanks BR |
|||
30-12-2023, 19:19 PM,
Post: #2
|
|||
|
|||
RE: Ford Convers instrument cluster random resetting
problem is not common actualy. try to heat resolder micros at first
|
|||
30-12-2023, 20:01 PM,
Post: #3
|
|||
|
|||
RE: Ford Convers instrument cluster random resetting
It is common, just look for information, and I have 2 meters with this problem
|
|||
30-12-2023, 20:15 PM,
Post: #4
|
|||
|
|||
RE: Ford Convers instrument cluster random resetting
It's a common problem in a lot of clusters, vibration loosens the solder joints where the cable goes into the cluster, open up and reflow the solder joints on the socket where the cable plugs in, worth a try, goodluck.
|
|||
30-12-2023, 20:35 PM,
Post: #5
|
|||
|
|||
RE: Ford Convers instrument cluster random resetting
Also, surface mount resistors crack the solder joint due to thermal cycling. Hard to see without magnification.
Very common in some GM trucks. If someone took the time to help you, the least you can do is take a few seconds and press two buttons!
Thanks + reputation. |
|||
Reputation: +1 - al70 [+1] | |||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content