Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
ISTA won’t set up connection
04-01-2024, 11:46 AM,
Post: #1
|
|||
|
|||
ISTA won’t set up connection
Hi all , my laptop is gone i i decide to start a new set up for my works so i bought a panasonic fz-g1 because is more handy and i installed all bmw tools along with ISTA the problem now is ISTA won’t scan the car basicslly when i select complete identification and scan it shows the conectiom manager when i can see ISTA recognised the car showing the VIN and the IP but once i select set up conection nothing happen ! I get a bit stuck because that never happen to me before any advice is welcome
UPDATE: Problem SOLVED , everything sort it now after reinstall vcredist apparently that was the problem |
|||
04-01-2024, 12:38 PM,
Post: #2
|
|||
|
|||
RE: ISTA won’t set up connection
what are you using ENET or ICOM?
If this post or any of my posts helps then don't hesitate to press thanks and add a reputation.
|
|||
04-01-2024, 12:42 PM,
Post: #3
|
|||
|
|||
RE: ISTA won’t set up connection
|
|||
04-01-2024, 12:43 PM,
Post: #4
|
|||
|
|||
RE: ISTA won’t set up connection
just a simple ENET cable i don't have a ICOM yet literally the same cable and the same software which i used on the previous laptop with a single exception on the tablet i don't have lan port so i run an usb to rj45 adaptor in order to connect the enet cable
|
|||
04-01-2024, 13:05 PM,
Post: #5
|
|||
|
|||
RE: ISTA won’t set up connection
(04-01-2024, 12:43 PM)dentzikhd Wrote: just a simple ENET cable i don't have a ICOM yet literally the same cable and the same software which i used on the previous laptop with a single exception on the tablet i don't have lan port so i run an usb to rj45 adaptor in order to connect the enet cable did you run as admin the ISTA_firewall_rules.bat? If this post or any of my posts helps then don't hesitate to press thanks and add a reputation.
|
|||
04-01-2024, 13:17 PM,
Post: #6
|
|||
|
|||
RE: ISTA won’t set up connection
Unfortunately i don’t have this file
|
|||
04-01-2024, 13:41 PM,
Post: #7
|
|||
|
|||
RE: ISTA won’t set up connection
(04-01-2024, 13:17 PM)dentzikhd Wrote: Unfortunately i don’t have this file here you have, rename from .txt to .bat |