[Misterwasp]

Could someone please help me. I bought used cluster but need the vin removed so i can code to my car. I cant see a vin in dump 35160wt.

[Gabriel87]

Nobody help you because u don't report back .....

[johann74270]

hi try this and tell me

[cipi gutuie]

first you need to know what must read from that cluster
posting only 35160 means that you are not able to do this kind of job
internet is full of info about cluster retrofit

[Misterwasp]

hi try this and tell me

Short vin looks like in 0006f0 and 000700 too do i fffffff those too?

[johann74270]

hi try this and tell me

Short vin looks like in 0006f0 and 000700 too do i fffffff those too?

yes try

[Misterwasp]

first you need to know what must read from that cluster
posting only 35160 means that you are not able to do this kind of job
internet is full of info about cluster retrofit

I could not find info saying use 95320 too as i read that when coding online 95320 is programmed on car

---

first you need to know what must read from that cluster
posting only 35160 means that you are not able to do this kind of job
internet is full of info about cluster retrofit

I could not find info saying use 95320 too as i read that when coding online 95320 is programmed on car

[Gabriel87]

You need virginise 35160wt and 95320.....
Don't try without desoldering eprom because corupt eeprom

[Misterwasp]

i have found 2 short vins in the 35160wt dump. i have replaced with my short vin and one short vin in 95320rt dump which i have also replaced with my short vin. reset the first 32 bytes of eeprom is this all that is needed?

[TKservice]

i just make vin to FFF in 35160 and code with esys. dont need change anything in 953...