Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
bmw f15, x5 2018
|
19-01-2024, 08:29 AM,
Post: #1
|
|||
|
|||
bmw f15, x5 2018
Hello,
Have below problem, any idea would be helpful. Tried to retrofit smfa for x5, f15, 2018 with sport seats, heating. First of all, smfa was wired from CON(CAN4) , but i gave him diagram and i advised that smfa needs to communicate on CAN2. Diagram is as below, but the problem is that CAN2 was straight to BDC , not through R2(terminating resistor), after a drive, car was crazy, most of modules dont communicate. BDC was replaced , programmed and problem persist(please see attachment). Any tips/idea what is the problem? Regards, Adrian |
