[sniegavirs]

I have an Audi A4 B5 and swapped in 3.0 TDI CR engine from A4 B7 with EDC16cp34 ECU.
Since there is no original ABS connected to the car EDC16CP34 ECU wants to see car speed signal but that is not possible anymore because of the engine swap in B5. Is there anyone who can help with removing correct limiter on switch off this need of speed signal!? Car limits it self to 4000rpm and when driven it even limits to 2500rpm.

All ecology is already turned off. There is DTC's P0501 and P1699 but turning them off doesn't help.

[____ANGEL___]

I have an Audi A4 B5 and swapped in 3.0 TDI CR engine from A4 B7 with EDC16cp34 ECU.
Since there is no original ABS connected to the car EDC16CP34 ECU wants to see car speed signal but that is not possible anymore because of the engine swap in B5. Is there anyone who can help with removing correct limiter on switch off this need of speed signal!? Car limits it self to 4000rpm and when driven it even limits to 2500rpm.

All ecology is already turned off. There is DTC's P0501 and P1699 but turning them off doesn't help.

try this, pass in pm, it's an old file made by me for a swap same issue and compatible with yours, dpf egr off.

[sniegavirs]

Thanks everyone. I solved it.