[Lenny123]

Hello there. I got a Renault Clio DCI 1.5 2002 with a Delphi TWR(Possibly DDCR). I need some help around to disable immo if possible. Chip type is ATMEL 25080

[alfabit]

Only virgin and use emu on CAN.

[philipcoin]

Hello there. I got a Renault Clio DCI 1.5 2002 with a Delphi TWR(Possibly DDCR). I need some help around to disable immo if possible. Chip type is ATMEL 25080

YOUR FILE IMMO OFF
TEST AND REPORT
THANK YOU

PC.

[einet]

Use emulator is the best

[Lenny123]

Thank you for your help and your time. Time to test it, will report back when I am done.

[philipcoin]

Thank you for your help and your time. Time to test it, will report back when I am done.

hello m8,
remember to cut immo line.
thank you.

[Lenny123]

Thank you for your help and your time. Time to test it, will report back when I am done.

hello m8,
remember to cut immo line.
thank you.

Which one PIN is the immo line to cut?

[alfabit]

Yes, immo line is none, your DDCR is immo on CAN-bus. For not sending immo code UCH <> ecu DDCR you must cut CAN bus, so you will have no more revs and temp indication on the dash, that`s why it a wrong solution immo off for ecu on CAN, only right solution is using emulator on CAN and keeping CAN bus alive.
But you do as your wish, i have doubts your ecu with CAN bus broken will start immo off. I made numerous ecus DDCR immo off only by CAN emulator, none worked immo off by eeprom dump even 95080 write WP.