Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Citroen Jumpy 2018 Dash Renesas R5F10DMJL upDATE READ CORRECT NEED MODIFY MILEAGE
26-01-2024, 00:44 AM,
(This post was last modified: 29-01-2024, 17:43 PM by Mshumacher.)
Post: #1
|
|||
|
|||
Citroen Jumpy 2018 Dash Renesas R5F10DMJL upDATE READ CORRECT NEED MODIFY MILEAGE
I have to read/write this Dash to edit mileage.
BSI has 95128 i think, so should not be problem read/write. Citroen Jumpy 2018 Dash MCU : R5F10DMJL I suppose will work with Autel XP400 Pro I have a big doubt... Im a little nervous with this renesas. I must read 8kb eeprom secured , correct ? And after reading process this renesas auto-erase or something like that ?? Need to read only 1 timeto avoid erase ?¿ I wont loose flash info ¿? when i read 8kb secured, correct ? I please hope someone can give a hint.. Thank you |
|||
27-01-2024, 04:02 AM,
Post: #2
|
|||
|
|||
RE: Citroen Jumpy 2018 Dash Renesas R5F10DMJL Read write Doubts
Update: R5F10DMJL I tried to read with Autel Xp 400 Pro... cant read, error ! Chip answer error picture low bottom left.
I used option 8Kb, Secured. I connected to points near chip that connect to chip : 9,12, 19, 20. 9 Blue Tool P40 12 Yellow Reset 19 Negative Ground, Black Cable Autel 20 Positive Red Cable Autel Like instruction picture Someone was able to read with xp400? Any trick here ¿? Use some resistor or lift pins? Car Citroen Jumpy 3 , Year 2018. Or someone have pinouts of the other side of board looks there are conector pads center of board ?? Maybe when i connect too near chip on other side im bypassing some capacitor or component that is needed for connection ? If not what tool is reliable for this chips renesas R5F ? Carprotool ? ( I have CPT, but i would like to know if works good with R5F before buy license.) VVDI Prog ? Upa original ? Other ? |
|||
29-01-2024, 17:14 PM,
(This post was last modified: 02-02-2024, 23:29 PM by Mshumacher.)
Post: #3
|
|||
|
|||
RE: Citroen Jumpy 2018 Dash Renesas R5F10DMJL Read write Doubts
Update read successfully by solder pads.
Later i upload pinout Mileage 251403 km Need 195000 km Someone can please modify ? Update , solved... |
|||
« Next Oldest | Next Newest »
|
Possibly Related Threads… | |||||
Thread | Author | Replies | Views | Last Post | |
VW Crafter 7C0920731A mileage corection | C(A)R | 6 | 98 |
8 hours ago Last Post: iProg-carradio |
|
Nissan Murano 2012 mileage correction | Mariushas | 1 | 11 |
8 hours ago Last Post: Timisdani |
|
Yamaha FJR mileage modification | bm92 | 14 | 135 |
30-04-2024, 09:01 AM Last Post: bm92 |
|
2021 VW ID 4 PRO Cluster 10A920320C mileage correction possible ? | NickMayer | 5 | 100 |
28-04-2024, 21:12 PM Last Post: NickMayer |
|
Fiat Talento Dash km correction higher | Cryjack | 4 | 71 |
28-04-2024, 11:59 AM Last Post: iProg-carradio |
|
Nissan NV200 dash | pawel7924 | 4 | 1,396 |
27-04-2024, 14:41 PM Last Post: Ecu_Blast |
|
vito cluster mileage | spoool | 3 | 134 |
24-04-2024, 23:46 PM Last Post: spoool |
|
Citroen C4 dash P9664319880 need pinout | pinotec | 5 | 101 |
24-04-2024, 13:51 PM Last Post: al70 |
|
Honda Varadero 125 2005 year - need dash power pinout | slevy70 | 0 | 24 |
24-04-2024, 10:51 AM Last Post: slevy70 |
|
W906 2018 Sprinter mileage EIS | MihaiC | 6 | 143 |
23-04-2024, 12:11 PM Last Post: MihaiC |
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content