[autoraedarum]

Hello
Have an damaged arbaig unit und buyed a new used one
Its the same partnumber, but VIN is diffrent

Read the 95640 and changed the vin , but does not work

In measurment block there is the right vin, but error does not disappear

Only diffrent is this

VSSZZZ3RZBR017241 @0324719484848 Vin from new one

VSSZZZ3RZAR008964 @011>135484848 Vin from old unit

Have changed it in eeprom but when i look in measurment block Vi is right, but the other number are the old one from the new unit

Can someone help me to changed this that error disappear.

Thanks

Seat 3R0959655.rar
File Type:
Downloaded:	1 times
Size:	75.7 KB

[renia1983]

why don't you resolder eeprom from old to new one and there should be option in VCDS to write/learn VIN or something like that. Had simillar problem with cluster swap in A4B7 and it was generating same error in few different modules but VIN was correct. It was just a matter of doin adaptations in my case and thats what I think might solve your problem too.

[autoraedarum]

Have solder the old eeprom in the new unit, but now no communication with the unit

[renia1983]

and if you put back old one it's ok?

[autoraedarum]

Havent try it at the moment, will try it later

[autoraedarum]

and if you put back old one it's ok?

Problem was, i have not but the PCB in the case without screws in the cover it das not comunicate

In adapt channel 81 i need a Pin for learning the vin, which pin do i need for this, ist this the Immo pin ?

[autoraedarum]

Solder the old eeprom in the new airbag ecu, but all errors from the old one are the same and i can not erase the errors.

Solder the new eeprom with changed VIN in the dump and try to learn the VIN with the WFS Pin, but does not work.

Someone knows which PIN i need

   

---

---

Solved with help from a member from a other forum

[renia1983]

you need to login to enable adaptations...vcds should give you a hint for that