Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Audi A6 4F Cluster replacement
02-02-2024, 08:38 AM,
Post: #1
|
|||
|
|||
Audi A6 4F Cluster replacement
Hello,
I want to clone a cluster on bench. I have AVDI Clone and I am able to read ConfigData via CAN-Special Function. But I can not read Immo data. There is an option for Read Immo data with ConfigData and Flash Dump. But how do I get the Flash dump? is there a other way to clone the dash? I have a UPA and a normal Programmer? |
|||
02-02-2024, 08:57 AM,
Post: #2
|
|||
|
|||
RE: Audi A6 4F Cluster replacement
Is there micronas chip in cluster ? If so , xprog reads it
|
|||
02-02-2024, 09:06 AM,
(This post was last modified: 02-02-2024, 09:48 AM by eFighter.)
Post: #3
|
|||
|
|||
RE: Audi A6 4F Cluster replacement
Update:
I was able to read FlashDump by removing flash chip and read it. (See file attached) But now I have an other problem, when I try to use the function "read Immo data with ConfigData and Flash dump" I get a fault message that config Data shut be 4kb. My file is 8kb Update: I read the EEPROM manuel, its a 2kb file. I am very confused now |