Unfortunately we do not accept new members for free, Now Registration cost 30€, if you are interesting Send Email to [email protected]
Solved // K+DCAN in ISTA
02-02-2024, 19:37 PM,
(This post was last modified: 05-02-2024, 14:19 PM by Pentheus.)
Post: #1
|
|||
|
|||
Solved // K+DCAN in ISTA
Hi, i have INPA on C drive working good, now i instal ISTA 4.22.22 on D drive ( free space ) but it does not communicate with the car I tried a bunch of instructions but no success.
Can someone advise me? E90 318D 2006 Keep in mind English is not my native language
|
|||
02-02-2024, 20:45 PM,
(This post was last modified: 02-02-2024, 20:46 PM by Stratofortress.)
Post: #2
|
|||
|
|||
RE: K+DCAN in ISTA
How is your ISTA interface settings and Ediabas configured?
Click Thanks and Reputationif this post helped you.
|
|||
02-02-2024, 21:04 PM,
(This post was last modified: 02-02-2024, 21:06 PM by Pentheus.)
Post: #3
|
|||
|
|||
RE: K+DCAN in ISTA
Wn10 1904 x64
ISTA 4.22.22 + Standart tools 2.12 ( tested with ediabas stanalone 7.3.0 to ) In ista interface ediabas.ini, ISTA/EDIABAS/ ini set to STD:OBD C drive ediabas ediabas.ini ( STD:OBD) obd.ini (com9 , latenci 1ms the same in device manager) Keep in mind English is not my native language
|
|||
03-02-2024, 09:03 AM,
(This post was last modified: 03-02-2024, 09:39 AM by Stratofortress.)
Post: #4
|
|||
|
|||
RE: K+DCAN in ISTA
You could test if setting Port=Com1 and HARDWARE=OBD in C:\EDIABAS\BIN\obd.ini makes a difference and also edit your USB adapter settings accordingly in Device Manager. Also check the configuration settings is Interface= STD:OBD in C:\EDIABAS\BIN\EDIABAS.ini.
Also edit the Ediabas settings in Rheingold\Ediabas\BIN\EDIABAS.INI matching for the interface as above. Click Thanks and Reputationif this post helped you.
|
|||
04-02-2024, 14:55 PM,
Post: #5
|
|||
|
|||
RE: K+DCAN in ISTA
(02-02-2024, 21:04 PM)Pentheus Wrote: Wn10 1904 x64 change com9 to com1 in device manager If you like my post please press
|
|||
04-02-2024, 16:37 PM,
Post: #6
|
|||
|
|||
RE: K+DCAN in ISTA
I already figured it out, it was enough to run toolset32 as admin at least once. Then ISTA already works, tested on two NTBs. I had all the settings right.
Keep in mind English is not my native language
|
|||
04-02-2024, 16:50 PM,
Post: #7
|
|||
|
|||
RE: K+DCAN in ISTA
tool32 doesnt change ediabas configuration nor system configuration...
|
|||
04-02-2024, 20:15 PM,
Post: #8
|
|||
|
|||
RE: K+DCAN in ISTA
When ISTA starts after Tool32 this might work, since the version of EDIABAS that is configured for COM9 is already running.
But to make it permanent try changing it to COM1 as suggested before. |
|||
« Next Oldest | Next Newest »
|
Users browsing this thread:
1 Guest(s)
1 Guest(s)
Return to TopReturn to Content