[Ratatouille98]

Hello everyone,

I need help for this theft return 2017 Huracan. Car came without keys, no BCM front and no BCM rear.
All other modules seem to be in place. Cluster looks like manipulated (was open and odo seems to be too low).

A new key kit (2 keys, cylinder lock etc.), BCM front and BCM rear was ordered NEW from lamborghini for this original car VIN.

After first try with ODIS, VIN displayed correctly. I got error FAZ1570E (no parts assigned to the car). 
We have also this error with cluster connected :
[en-GB]str_Kombi_VIN is after declaration in subroutine

As I read and found the following information, Huracan are on 5th Immo generation like an A6. 
Immo should not be in cluster, is this correct ?

VIN identification on DME1, DME2, TCU (DL800 I think?), EZS are correct.
Only Power class is set to 00 in TCU, not sure if it’s normal, VIN correct.

After trying to adapt immo, got component protection on MMI. But Ignition is working with no key inside, possibly only relay locked when attempt programming ?


What I tried :

- Disconnect cluster
- remove all other IMMO parts (disconnect DME1, DME2, EZS, cluster. I only let TCU connected and new BCM2). Same error : FAZ1570E
- Try only BCM2, without BCM connected (so only one new module connected), not working.
- Read eeprom (24C32), no VIN inside as I see.

If someone have knowledge and can help, that would be so great  

Original VAS6154 available if someone can help remotely, invoice for parts and registration also.

Many thanks in advance

[rs@chip]

Hello everyone,

I need help for this theft return 2017 Huracan. Car came without keys, no BCM front and no BCM rear.
All other modules seem to be in place. Cluster looks like manipulated (was open and odo seems to be too low).

A new key kit (2 keys, cylinder lock etc.), BCM front and BCM rear was ordered NEW from lamborghini for this original car VIN.

After first try with ODIS, VIN displayed correctly. I got error FAZ1570E (no parts assigned to the car). 
We have also this error with cluster connected :
[en-GB]str_Kombi_VIN is after declaration in subroutine

As I read and found the following information, Huracan are on 5th Immo generation like an A6. 
Immo should not be in cluster, is this correct ?

VIN identification on DME1, DME2, TCU (DL800 I think?), EZS are correct.
Only Power class is set to 00 in TCU, not sure if it’s normal, VIN correct.

After trying to adapt immo, got component protection on MMI. But Ignition is working with no key inside, possibly only relay locked when attempt programming ?


What I tried :

- Disconnect cluster
- remove all other IMMO parts (disconnect DME1, DME2, EZS, cluster. I only let TCU connected and new BCM2). Same error : FAZ1570E
- Try only BCM2, without BCM connected (so only one new module connected), not working.
- Read eeprom (24C32), no VIN inside as I see.

If someone have knowledge and can help, that would be so great  

Original VAS6154 available if someone can help remotely, invoice for parts and registration also.

Many thanks in advance

you get this mesage when parts are realy not compatible to this vin or svm must be provided before adopting it..you should chek if any svm codes avalible acording to your part numbers..If yes programing will complete normal after you insert them

[Ratatouille98]

Thank you for your reply.
SVM show rear BCM2 coding is ok (HCONFIG46)

Unfortunately I do not have access to the parts catalog. 
I ordered the parts with the VIN, This is what I got :

- 4H0907064HB (BCM 2 Rear)
- 4H0907063 JK (BCM Front)
- 4T1898374MTKE (1 Set of lock cylinders)

[rs@chip]

Thank you for your reply.
SVM show rear BCM2 coding is ok (HCONFIG46)

Unfortunately I do not have access to the parts catalog. 
I ordered the parts with the VIN, This is what I got :

- 4H0907064HB (BCM 2 Rear)
- 4H0907063 JK (BCM Front)
- 4T1898374MTKE (1 Set of lock cylinders)

svm code should came with bcm , ask the provider from where you buy or try find someone with original etk

[Ratatouille98]

Thanks for reply.
No SVM code provided from Lamborghini dealer where I buy parts, they say this operation are done remotely from tech when car is there.
I see some SVM exchange codes (XCHG/ XCHG46A001 / XCHGA001) on Audi TSB, not sure if compatibly.