[nadelhubgeber]

Hallo,

I need help with new Xhorse XEB510EN B5 Super Remote.

Are here user with experiences?

Keylearning for immo is no problem, but I can`t pair remote.
Working with VVDI2.
I try with VCDS and OBDeleven.
Once I got the situation, that only the closing knob got a function, but no closing the
doors, only the hazard warning lights are doing the job so long as I press the knob again,
than the lights are stopping.

Anyone could help, please.

Perhaps someone could help with the difference between XNB510EN and XEB510EN ?

I must say, I swaped cluster from old Touran 1T2 (red one like Golf MK5) to 1T3 (color one like Golf MK6) bevor.

Thank you
nadelhubgeber

[raffy haddad]

Your using super remote for ordinary remote
Instead use xhorse remote that is ordinary remote seperate than transpomder
What i mean ordinary remote that can fit onto seperate transpomder and you program remote section alone and transpomder alone
Hope i explained in good way
Regards

[nadelhubgeber]

Thank you.

I try to understand and learn your way.

nadelhubgeber

---

Hallo,

you think, I should by a XKB506EN remote and a immo transponder like XT27A01 XT27A66 chip
separately?
Or only buy a ID48 transponder for VW and use original OEM key with original remote?

Thank you
nadelhubgeber

[raffy haddad]

Yes you need wire remote not super remote you prog the remote with appropriate fw with vvdi tool and you learn to car and then put external transponder id 48 or xt27
What suite you

[nadelhubgeber]

Thank you for helping me, I´m new in immo and cluster swap,
it`s my first job for myself.

I ordered a wire remote and the xt27 immo transponder and tell you,
when I got it and try the best to pair the remote.

All the best
nadelhubgeber

[nadelhubgeber]

Hallo,

problem solved with new XKB506EN remote and xt27 immo transponder like raffy haddad said.

Thank you raffy haddad for your help and solution.

nadelhubgeber